Latest News

Front Row Motorsports is Becoming one of NASCAR's Most Exciting Small Teams

Front Row Motorsports driver Landon Cassill drives the #34 car in NASCAR Monster Energy Cup series

Front Row Motorsports driver Landon Cassill drives the #34 car in NASCAR Monster Energy Cup series

There are NASCAR racing teams known as Goliaths, that are perennial threats to be the top teams of their class. Then there are the Davids, the racing teams that are steady and compete with fewer resources than the top teams have and stay relevant year after year. Front Row Motorsports, located in Statesville, North Carolina, is one of those Davids.

Jerry Freeze has been the General Manager of the team since 2009. According to Freeze, Bob Jenkins, a multi-store Taco Bell franchisee, is the team owner.

“Jenkins first got involved in team ownership as part of the Jimmy Means team, which was known as Means-Jenkins Motorsports. Means is a long time NASCAR competitor,” said Freeze. “The team was active for one year and then Jenkins separated and founded Front Row Motorsports.”

It was basically a part time endeavor that competed in the Nationwide and Cup Series. In 2008, it started racing full time.

“We were initially part time because of finances,” explained Freeze. “We wanted to get our legs underneath us and take the time we needed to build up our resources and budget so that we could race full time,” said Freeze.

By 2009, the team was focused on racing in the Cup Series full time. One of the first racers to sign with the team at this time was John Andretti.

“That’s when it really became a full time team and we really started to get major sponsors,” Freeze said.

“We’ve been a part of the Ford team since 2010. We joined Ford so that we could be a part of the Roush Yates Engine Program. Before then, we raced Chevrolets,” said Freeze.

The engines that power the cars of Front Row Motorsports are 358-cubic inch V8s. The team has 60 employees including two drivers – Landon Cassill drives the number 34 car and David Ragan pilots the number 38 car.

Born in Unadilla, Georgia on December 24, 1985, Ragan is married with two children and resides in Kannapolis, North Carolina. During his career so far he has:

Landon Cassill's #34 car is a part of the Front Row Motorsports team

Landon Cassill's #34 car is a part of the Front Row Motorsports team

• Two NASCAR Monster Energy Series wins

• 15 NASCAR Monster Energy Series Top 5s

• Two NASCAR Xfinity Series wins

• 17 NASCAR Xfinity Series Top 5s

• Six Pole Awards in NASCAR’s Top 3 Series

He first started racing when he was 11 years old when he raced the Bandolero Series in 1997. In those early years, his father, Ken Ragan, a former Winston Cup driver, guided him. He won two national championships within three years and then graduated up to full-size cars, maneuvering through the Goody’s Dash Series and Legends Pro-Division.

He began racing in NASCAR when he turned 18. His first races included the Camping World Truck and XFINITY Series as well as a limited ARCA schedule.

Jack Roush invited him to join the Roush Fenway Racing Team in 2007 and assigned him to drive the number 6 Ford in what is now called the Monster Energy NASCAR Cup Series. He finished his first season as runner-up for Rookie of the Year in the Cup Series and won Rookie of the Year in the NASCAR XFINITY Series.

He won his first cup race in July 2011 at the Daytona International Speedway. He then moved on for his first stint with Front Row Motorsports in 2013 and was the upset winner at Talladega Super Speedway. Fellow teammate David Gilliland finished second. This was the first win for Front Row Motorsports.

In 2015 Ragan served as a “super sub” for Joe Gibbs Racing when he replaced Kyle Busch, who had been injured, and was assigned to drive the number 18 Toyota for the first part of the season. He also served as a sub for Michael Waltrip Racing replacing an ill Brian Vickers.

Front Row Motorsports driver David Ragan drives the #38 car in NASCAR Monster Energy Cup series

Front Row Motorsports driver David Ragan drives the #38 car in NASCAR Monster Energy Cup series

He returned to Front Row Motorsports after racing for BK Racing in 2016.

“The win at Talladega put Front Row on the map and helped us attract some major sponsors,” noted Freeze. Front Row would go on to achieve another upset win in August 2016 with Chris Buescher driving the #34 car at the time.

Ragan’s major sponsors include Camping World, Overton’s, Gander Mountain, and Shriners’ Hospitals for Children. He has been associated with the hospitals for many years and has served as the charity’s ambassador. Freeze added that the Shriners promote their hospitals through golf tournaments and through the College Football East-West Shrine game.

Landon Cassill was born on July 7, 1989 in Cedar Rapids, Iowa, and now resides in Charlotte, North Carolina with his wife Katie and two children.

He has achieved the following so far in his career.

• Four time state champion of the Newton Kart Klub

• Youngest winner ever in the ASA Late Model Series at the age of 16

• First driver ever to win both the Northern and Southern Divisions of ASALMS

• Four NSCS Championships at “Test Driver” for the #48 team from 2007-2010

• Finished fourth at Talladega in the NASCAR Sprint Cup Series

• One career Xfinity Series Top 5

• 12 career Xfinity Series Top 10s

• One career Xfinity Series Pole

With his dad in the used car business, it was to no one’s surprise that Cassill was born to race. He started racing go-karts when he was 8 years old and gradually moved up to full size racecars while in high school. He not only raced, he also built his cars and then raced them. When he wrecked them, he fixed them.

As a professional racer, he has served with startup teams all the way to the very top teams in the sport. As the test driver for Hendricks Motorsports, he won four championship rings from 2007 through 2010. The experience was worth everything as he learned how a championship organization operates and the experience was instrumental in teaching him leadership abilities that has helped him and the teams he has raced for.

David Ragan's #38 car is a part of the Front Row Motorsports team

David Ragan's #38 car is a part of the Front Row Motorsports team

He has represented nationally known entities including the National Guard and GoDaddy and is a seasoned spokesperson in the corporate world.

Freeze noted that Cassill’s main sponsors include Loves Travel Stops and CSX, a railroad freight company that promotes the Play It Safe Program, a project advocating safety around railroad tracks.

According to Freeze, selecting drivers requires a careful balance of racing skills and people skills.

“You want someone who has skills on the racetrack, but you also want them to be a good partner with the sponsors,” he said. “There are drivers with a lot of talent, but don’t have the personality fit. Sometimes you have to make compromises. In our case, we are very fortunate to have two drivers that understand the business outside the racecar quite well and they know what their responsibilities are. You don’t have to ask them to do anything. They go the extra mile without being asked.

“Landon and David have different ways of going about it,” continued Freeze. “David is an everyman kind of person who is interested in causes and outdoor life. He follows the sports teams from the Atlanta area. Atlanta is more cosmopolitan, so he likes big cities like Los Angeles and New York.

“Landon, on the other hand, is an Iowa boy who has a cosmopolitan style and a social media savvy unlike any other driver in NASCAR. He can talk about trends in the fashion industry or the latest Silicon Valley creation as easily as talking about springs and shocks,” continued Freeze.

Front Row Motorsports permits its drivers to race on their own.

“Landon is doing it next weekend. There’s a race in Iowa, his home state, that he wants to compete in. So we’re letting him. Our only concern is that he races a Ford. However, we don’t do that a whole lot,” said Freeze.

When asked if managing a racing team is like head coaching an NFL team or more of a business, Freeze answered, “It’s a lot like an NFL team. We have spots on the roster that have to be filled. If, say, a tire changer is not performing, as he should, we may put in a backup.

“But it’s also like a business,” he continued. “There are limits to what we can do to stay within boundaries due to budget. Our budget is not like that of the top tier teams like Joe Gibbs Racing. So we have to figure out ways to outrun them on the racetrack. Sometimes we do it and sometimes we don’t.”

Cars are disassembled and then reassembled during the 6 weeks of preparation.

The car is disassembled so that all parts can be maintained, repaired, or replaced and reassembled

Freeze noted that Front Row Motorsports has 18 people on its crews. There is a crew team for car no. 34 and another team for car no. 38.

“Each crew has a crew chief, mechanic, a guy to take care of the tires, a driver of the truck that transports the racecar, etc.,” explained Freeze. Donnie Wingo is the crew chief for car no. 34 and Derrick Finley is the crew chief for car no. 38.”

Front Row Motorsports owns 12 cars per team that are rotated through the racing schedule. The group includes special cars that are designed for specific tracks like Daytona and Talladega. Most of the cars are known as “down force cars,” which are raced on “down force tracks.”

It takes Front Row six weeks to prepare a car for a race. A shop foreman confers with the driver and crew chief to schedule the car for its next race when it returns to the shop. Then the work begins.

“For example, our next race is in Michigan this weekend,” explained Freeze. “Preparation of that car began six weeks ago. Generally, after a race a car will have some kind of body damage. This is repaired. In addition, the car is disassembled and parts from the car are shipped out to the appropriate department for maintenance. Suspension components go to the suspension room, engine parts go to the engine shop, fuel components go to the fuel cell guy, etc.

Each department keeps mileage logs for each part.

“We set a mileage limit for each part. When that has lapsed, we replace it. So we have to have an extensive inventory on hand of every part of the car,” said Freeze.

After maintenance, repair, or replacement, all parts are collected together for reassembly.

By race week the car is assembled and members of the crew and the driver start doing pre-set up.

“They come up with a final starting package they may want to try or make some other modifications and tweaks. In addition, modifications are made so that the car will race low on the track,” said Freeze.

The Wednesday before the race the car is ready. It is loaded on a truck and off it goes to the race site. The truck arrives at the track by Friday.

Freeze noted that the off-season may be the busiest time for the workers at the shop.

“The racing season is our calmest part of the year because there is a routine,” said Freeze. “The off-season is busy because we are preparing for next year.”

Freeze noted that building cars that will be raced next year begins in November.

“So we need to come up with our plan for next year by the first of November,” he said. “The plan includes how many cars we’re going to build, whether or not to cut the front ends, whether or not to cut the rear ends and more.”

It takes 6 weeks for the shop crew at Front Row Motorsports to prepare a car for the next race

The Front Row Motorsports shop has 6 weeks to prepare a racecar for its next race

The off-season for NASCAR racing lasts for 12 weeks. So a plan for the following year must be created and executed within that timeframe.

Front Row Motorsports partners or sponsors include:

• Love’s Travel Stops

• Camping World

• K&N

• CSX - Play It Safe Around Railroad Tracks

• Good Sam Club

• Overton’s

• Jacob Companies

• Juice Batteries

• Fr8Auctions.com

• Schwarze Industries

• The Pete Store

• Shriners Hospitals for Children

• Lincoln Electric

• Zak Products

• Sherwin Williams

• Safety-Kleen

• Mac Tools

• SEM

Freeze pointed out that K&N has been a partner of the team’s since 2010.

“It’s been a great relationship. We don’t have to worry about filters on our racecars,” said Freeze.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

K&N Air Intake Offers an Estimated Boost of 8.14-HP on 2016-2017 Colorado/Canyon

The K&N 63-3095 intake includes a heat shield that installs into the original air box space.

The K&N 63-3095 intake includes a washable and reusable RF-1044XD Universal Clamp-On Air Filter.

Introduced in time for the 2004 model year, the Chevrolet Colorado and its twin, the GMC Canyon, were designed in a joint venture by General Motor’s North American operations, GM in Brazil and Isuzu. The compact pickup trucks replaced the Chevrolet S-10 and the GMC Sonoma compact pickups. The front engine, rear-wheel drive and four-wheel drive vehicles were available in three body styles –- 2-door regular cab, 4-door extended cab, and 4-door crew cab.

Seven engines were used to power the vehicles in its first-generation, which ran from 2003 to 2012. They included:

• 2.5-liter (153 cubic inches) 4JK1-TC

• 2.8-liter (171 cubic inches) LK5 I4

• 2.9-liter (177 cubic inches) LLV I4

• 3.0-liter (183 cubic inches) 4JJ1-TC

• 3.5-liter (214 cubic inches) L52 I5

• 3.7-liter (226 cubic inches) LLR I5

• 5.3-liter (323 cubic inches) LH8 V8

The 2.5-liter 4JK1-TC is a common-rail direct injection 16-valve DOHC intercooled turbo-diesel engine was produced in Thailand by Isuzu and generates 116-horsepower (85 kW) and 280 N-m of torque at 1800-2200 rpm.

The 2.8-liter LK5, also called the Vortec 2800, produces 175-horsepower (130 kW) at 5600 rpm and 185-lb-ft (251 N-m) of torque at 2800 rpm.

The 2.9-liter LLV, which is also called the Vortec 2900, delivers 185-horsepower (138 kW) at 5600 rpm and 190-lb-ft (258 N-m) of torque at 2800 rpm.

The 3.0-liter 4JJ1-TC DOHC 16-valve engine is also an Isuzu engine produced in Thailand that features common rail direct injection with turbo and intercooler and produces 146-horsepower (107 kW) ant 294 N-m of torque.

The 3.5-liter L52, also called the Vortec 3500, offers 220-horsepower (160 kW) at 5600 rpm and 225-lb-ft (305 N-m) of torque at 2800 rpm when dynoed at the flywheel and produces 179.13-horsepower (133.58 kW) at 6001 rpm when dynoed at the rear wheels.

The 3.7-liter LLR, also known as the Vortec 3700, generates 242-horsepower (180 kW) at 5600 rpm and 242-lb-ft (328 N-m) of torque at 4600 rpm.

The 5.3-liter LH8 offers 300-horsepower (220 kW) at 5200 rpm and 320-lb-ft (434 N-m) of torque at 4000 rpm.

Two transmissions were available –- a 5-speed manual and 4-speed automatic.

The second-generation Colorado/Canyon was introduced in time for the 2012 model year. They are available in three different cab styles –- regular cab (also called single cab), extended cap (or space cab) and crew cab (or double cab) and they are available as a rear-wheel drive or four-wheel drive.

Six engines are available to power the pickups. They include:

• 2.4-liter Flexpower I4 gasoline/ethanol engine

• 2.5-liter Ecotec LCV I4 gasoline engine

• 2.5-liter Duramax XLD25 I4 turbodiesel engine

• 2.8-liter Duramax LWN I4 turbodiesel engine

• 3.6-liter LFX V6 gasoline engine

• 3.6-liter LGZ V6 gasoline engine

The K&N 63-3095 intake accommodates the factory mass air sensor and crank case vent house.

The K&N 63-3095 intake offers an estimated boost of 8.14-HP on 2016-17 Colorado and Canyon pickups.

The 2.4-liter Flexpower I4 engine powers the 2012-2017 Colorado and Canyon that are sold in Brasil.

The 2.5-liter Ecotex LCV powers the 2015-2017 Colorado and Canyon and produces 200-horsepower (149 kW) at 6300 rpm and 191-lb-ft of torque at 4400 rpm.

The 2.5-liter Duramax XLD25 4-cylinder turbodiesel engine first powered the Colorado and Canyon in 2012. The DOHC 16-valve common rail turbo direct injection engine with intercooler offers 163-horsepower (120 kW) at 3600 rpm and 280-lb-ft (38 N-m) of torque at 2000 rpm.

The 2.8-liter Duramax LWN DOHC 16 valve 4-cylinder turbodiesel engine powers the 2016 Colorado/Canyon and delivers 181-horsepower at 3,400 rpm and 369-lb-ft of torque at 2,000 rpm.

The 3.6-liter LFX V6 powers the 2015 and 2016 Colorado and Canyon models sold in the United States and offers 305-horsepower (227 kW) and 269-lb-ft (365 N-m) of torque.

The 3.6-liter LGZ V6 drives the 2017 Colorado and Canyon models sold in the U.S. and delivers 308-horsepower (230 kW) and 275-lb-ft (373 N-m) of torque.

The Chevrolet Colorado and GMC Canyon were awarded the Motor Trend’s 2015 and 2016 Truck of the Year.

Anyone who owns a 2016 or 2017 Chevrolet Colorado or GMC Canyon should be happy to learn that K&N has introduced the 63-3095 performance intake kit. Dyno tests have confirmed that the intake offers an estimated boost of 8.14-horsepower at 3200 rpm.

It includes a K&N RF-1044XD universal clamp-on air filter, a free-flowing polyethylene intake tube that accommodates the factory mass air sensor and crank case vent hose, and a heat shield to guard against hot engine air from entering the intake and that installs into the original air box space.

The oversized cone shaped filter features a multilayered cotton gauze media that has been treated with a special grade of oil. The oil makes the cotton strands so sticky they can catch and hold on to potentially harmful contaminants.

The filter is washable and reusable and will last for up to 100,000 miles before servicing is required, depending on driving conditions.

K&N also offers the 99-5000 filter care service kit that is formulated to cleanse and rejuvenate the air filter so that it can be used over and over again. In fact, it will perform for the life of the vehicle.

K&N backs the air filter with a 10-Year/Million Mile Limited Warranty that promises that it will perform for 10 years or 1,000,000 miles before replacement is required.

The intake not only boosts horsepower. It also improves throttle response, acceleration and engine sound. It is designed and engineered to replace the restrictive factory air filter and air intake housing and offers a smooth and straighter path of airflow to allow the engine to breathe in a larger amount of air than is supplied by the factory assembly. More air translates to more power and acceleration at all points of the engine’s rpm range.

The aerodynamically engineered intake tube routes the air into the engine’s throttle body for a guaranteed power gain.

The 63-3095 air intake can be installed in about 90 minutes using common hand tools and the vehicle’s existing factory mounting points.

The K&N 63-3095 AirCharger air intake system is designed to fit the following vehicles:

2017 GMC CANYON 2.8L L4 Diesel Engine - All Models
2017 CHEVROLET COLORADO 2.8L L4 Diesel Engine - All Models
2016 GMC CANYON 2.8L L4 Diesel Engine - All Models
2016 CHEVROLET COLORADO 2.8L L4 Diesel Engine - All Models

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Roland Sands Design's Custom Indian Scout Sixty to be Given Away at Buffalo Chip

The RSD custom Scout to be given away at the Sturgis Buffalo Chip event

The Roland Sands Designs custom Scout pays tribute to a Sturgis match made in Heaven

The epicenter of the annual Sturgis Motorcycle Rally spectacle is the iconic Buffalo Chip Campground. Speaking of iconic, there is not a motorcycle brand that is more indelibly rooted in American motorcycling history than Indian.

The two icons are coming together in the Buffalo Chip Moto Stampede Indian Scout Giveaway. Roland Sands Design (RSD) has created an exciting Scout that will be the crown jewel of the giveaway.

The modern Indian Scout Sixty merges classic style and cutting edge modern technology. It is also quickly emerging as one of the motorcycling industry’s most reliable marquees. Roland Sands Design has put the Indian through the gauntlet of the K&N-sponsored Super Hooligan racing series, and the Scout Sixty has more than proven its mettle.

The RSD custom Scout to be given away at the Sturgis Buffalo Chip event

Roland Sands Design trusts the Scout's engine protection to K&N filtration

“After all of the revving and thrashing that is Hooligan racing, we have honestly never had to do anything to the internals of any of the engines in these bikes,” reports Sands. "We are truly impressed; and we are still trying to break them.”

While the new Scout Sixty is a true turn-key excitement machine for the masses, in the hands of hotshot hooligan racers and flat trackers, the Indian is a fire-breathing podium topper.

“These Scout Sixtys have proven themselves over and over to be strong and take repeated beatings with minimal maintenance,” says Sands. “After each race, all we seriously have to worry about is washing them off, changing the Motul oil, replacing K&N oil filters, and new Dunlop DT3 tires as they wear... that’s it, outside whatever we have bent or broken from crashes. Exactly what most of us want out of a motorcycle; something you can enjoy riding more than working on.”

The RSD custom Scout to be given away at the Sturgis Buffalo Chip event

The Roland Sands Designs custom will be battle tested in the Sturgis Super Hooligan race

If you are the winner of the Buffalo Chip Moto Stampede Indian Scout Giveaway, you can have one of the coolest custom Indian Scouts to date. The RSD Scout Sixty will be one of two custom Indian racers to be given away after facing off at the RSD Super Hooligan races at the Sturgis Buffalo Chip Moto Stampede.

That’s right, a lucky contest entrant will ride away on the race-tested and battled-scarred RSD custom Sixty. The winner will be announced at the Ozzy Osbourne concert at the huge music festival hosted by the Buffalo Chip.

The RDS Indian Scout Sixty build is a virtual smorgasbord of exciting mods. Performance upgrades include a custom RSD exhaust, K&N filtration, and dialed in suspension.

The Scout's billet aluminum bits include a custom RSD upper triple clamp and ultra-trick hand and foot controls. The bodywork is also custom trimmed and adds to the Scout’s race inspired look.

Finally, the paint scheme is a one-off tribute to the merging of the two icons. Both the Buffalo Chip and the Indian logos grace the Scout’s tank. The RSD custom Scout Sixty is truly a treasure that some lucky contest participant will cherish.

The RSD custom Scout to be given away at the Sturgis Buffalo Chip event

The Roland Sands Designs Indian Scout Sixty is built to perform

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Kyle Larson Wins at Michigan International Speedway on Father's Day

Kyle Larson, NASCAR, K&N, Michigan, Fathers Day

Kyle Larson celebrating his win at Michigan with his Father on Fathers Day

Kyle Larson delivered a sweet Father's Day present to his dad on Sunday, a Win at Michigan International Speedway in the FireKeepers Casino 400. Larson, who saw a win slip away from him at Dover just a couple of weeks back, used his restarts to his advantage and won his second race of the season.

"Yeah, Ryan Blaney gave me a heck of a push," Larson said of the decisive restart that helped earn his third career victory. "So I’ve really got to thank him a ton. I knew the Penske cars took off good, so I was happy to see him behind me. For us to withstand a few restarts there with some tough competitors there was pretty important. I can’t thank these guys enough."

This was Larson’s third career win, and second of the season, although the points do not show it. Larson is currently sitting in first place in the Monster Energy NASCAR Cup Series Standings, five points over Martin Truex Jr. Larson was able to win based on his past experiences of the restarts, something that he struggled with in the Dover race. Larson led 4 times for 96 laps and received 57 points and 5 playoff points.

Kyle Larson, NASCAR, K&N, Michigan, FireKeepers Casino 500

Kyle Larson celebrating his second win of the season at Michigan International Speedway

"I definitely watched the replay," Larson said. "We looked at Jimmie's driver data versus mine from the final restart at Dover, learned a little bit from that stuff." “Honestly, I knew what I did wrong as soon as we took the green at Dover. But, yeah, here at Michigan, it's different. You have a long straightaway. The front stretch at Dover is pretty bumpy, so it's hard to get grip. It's not hard to get grip here at Michigan. It's kind of just a drag race."

Chase Elliott finished in second place, .993 seconds behind Larson. Elliott did not lead during the race.

"From where we started the day to where we ended up, I was really proud of our effort," Elliott said. "I really think we over-achieved today from what we had on Friday and Saturday, and even last night, I was getting a little nervous about how the day was going to go. We had a couple of opportunities to get the lead. And, unfortunately, it just didn’t work out. But we’ll move on.”

Joey Logano finished in third place, and did not lead during the race. Logano battled it out, coming from 19th to 3rd in 50 laps.

Kyle Larson, NASCAR, K&N

Kyle Larson and his son, celebrating after the win

“Feels great. You have no idea how good this feels (smiling)” Logano said. “Feels like a win, just to stop the bleeding. No secret, last month, month and a half, has been a struggle for us with just a lot of things going wrong during the races. This was an uneventful race for us.”

Martin Truex Jr. came in first place in both stages of the race, gaining 2 playoff points.

Kyle Larson reclaimed his lead in the Monster Energy NASCAR Cup Series Standings with his win at Michigan, currently with 640 points and 13 playoff points. Martin Truex Jr. is in second place with 635 points and 20 playoff points. Kyle Busch is in third place with 510 points and 4 playoff points.

The next race in the Monster Energy NASCAR Cup Series will be at the Toyota/ Save Mart 350 at Sonoma Raceway

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

TORC PRO Lights Racer Andrew Carlson Crashes Out At ERX Motorpark in Elk River, MN

2017 is Carlson Moto's first full season in TORC after many years in SnoCross

Andrew's flip caught on video shows him digging and executing a quarter flip, landing on his wheels

With PRO Light points leader Casey Currie otherwise occupied, K&N racer Andrew Carlson was handed a golden opportunity to move up in the championship order at the Twin Cities Takedown, round three of the TORC series. As the air temperature reached the mid-90s, the stage was set for the 14-lap PRO Light final.

And it’s on familiar ground for Andrew that the race was held. His father, Chris, co-owns the ERX Motor Park facility, its one-mile track praised for its design including challenging terrain, use of natural elevation changes, a mixture of soils, and multiple lines. And for the TORC Series event, sand was blended into the soil to allow the surface to change and become more technical throughout the race.

Andrew qualified well, taking the outside pole beside Kyle Kleiman. Kyle got the jump on Andrew at the start, and the duo broke free from the field and proceeded to set and reset the fastest times of the race as they battled for position. Soon Andrew took the lead with a well-timed move to the inside line in the come-back turn after the finish line jump.

Andrew leading the field in his K&N Ford PRO Light truck at the ERX facility his father co-owns

Andrew leading the field in his K&N Ford PRO Light truck at the ERX facility his father co-owns

With his hometown fans cheering him on, it looked as if Andrew might drive away for the second PRO Light win of his nascent career, but Kyle saw things differently. Just a lap prior to the mid-race competition caution, Kyle regained the lead. He did so by diving through the huge braking bump moguls that had been dug-in over the course of the race at the entrance to the high-banked “Talladega Turn” to take the lead going into the caution. This set-up a dash for the finish the moment the drivers took the green.

Not giving up easily Andrew pressed hard right from the restart, diving deep into the corners while searching for the smallest of openings. Unfortunately, Andrew caught a rut on the entrance to the Talledega Turn and launched into a quarter-turn cartwheel. Though he landed on his tires and drove away, the truck was clearly tweaked, and missing most of its bodywork, and Andrew’s chance at another hometown win had ended.

“The braking bumps coming into that corner were huge,” said Andrew after the race. “I got a little aggressive coming in and caught a rut. I’m obviously disappointed, but we learn from our mistakes. We’ll go back to the hauler and regroup.”

Carlson Moto is preparing for the next round at the famous track in Crandon, WI

The Carlson Moto team is seeking more podiums this season after Andrew's breakthough win last year

The crash allowed Kyle to run away for the win, with Chad Rayford second and Shawn Morris third.

“We were racing about as tight as you could get,” Andrew explained. “My truck was working flawlessly. Whether I took the high line or protected the inside, it didn’t seem to matter, it would rotate and my Atturo tires would hook-up.”

Unfortunately, Andrew’s shot at redemption will have to wait another day. With a Sunday morning storm knocking out power to the track came safety concerns for racers and fans which prompted TORC Series officials to postpone the race.

In terms of the season-long points chase, Andrew leaves ERX fifth in points, but just three points out of third in a very tight grouping. Leading the PRO Lights points chase is Kyle Kleiman with brother Cody second. Chad Rayford is third with fellow K&N racer Cam Reimers in fourth.

Andrew and the Carlson Moto are now hard at preparations for Rounds Five and Six at the Big House Brawl at the famed Crandon, Wisconsin track.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N