Latest News

Colton Haaker Earns the 2016 EnduroCross Crown While Cody Webb Wins in the Finale

Colton Haaker at California EnduroCross

Colton Haaker celebrates his championship with the number 1 plate (Photo: Adam Booth)

As the dust settled in Ontario, California, Cody Webb had won the battle, but Colton Haaker won the season-long war. The sport’s two top stars made 2016 a campaign to remember with a back-and-forth battle, but Haaker’s cushion was enough that he sealed the deal with his second place finish in the final round.

In reality, Haaker only needed to finish seventh or better to capture the #1 plate. But clearly, he is not the kind of guy to play it safe. “Really, nobody would expect me to come out here and charge with so much on the line, but I’m always trying to push myself and I did that tonight,” Haaker said. “It’s what pushes me and it worked out for the championship even though going hard had me crash a few more times than I wanted.” 2016 will sit as a benchmark for the new series champion. This is the first AMA title for Haaker, who had an impressive season with five wins and three second place finishes.

Cody Webb racing in California EnduroCross

Cody Webb takes the win in the final EnduroCross race (Photo: Adam Booth)

Webb had another stellar round in Ontario with a heat win, a win in the Hot Lap competition, and the main event win. However, the season lead that Haaker had amassed proved too great in the end. Webb’s disappointment was evident after the race, but he showed class and respect for his series rival. “A few little things went wrong this year and I let the championship slip away,” Webb said. “Colton was so solid and I couldn’t chip away at his points lead this year. I’m really happy I got a convincing win tonight and look forward to carrying the momentum into next season.”

The battle for third added some drama to the final race weekend. In the end, Cory Graffunder edged out a pair of 'Tys for the final podium spot. Ty Cullins finished in fourth and Ty Tremaine in fifth in the season finale. “The race was pretty exciting tonight because somehow I got a good start from the back row and came out fifth by turn two,” Graffunder said. “And after that I had a good battle with Tremaine back-and-forth a few times.” Graffunder’s podium is especially impressive considering he had just arrived back in the US after competing in the grueling Baja 1000.

Cory Graffunder racing in California EnduroCross

Cory Graffunder races his way to the podium (Photo: Adam Booth)

On the season, Tremaine edged out Mike Brown to finish third in the 2016 standings. Proving that every point counts, Tremaine's heat race win gave him the single point that was the separation he needed to step up on the season podium.

The competitive rivalry between Haaker and Webb, as well as the sport’s hungry up-and-comers bodes well for an exciting 2017 season. K&N is proud of all the racers in the series and we look forward to a continued partnership with the series.


2016 Ontario EnduroCross Main Event Results

1. Cody Webb, KTM

2. Colton Haaker, Husqvarna

3. Cory Graffunder, KTM

4. Ty Cullins, Beta

5. Ty Tremaine, KTM

6. Noah Kepple, KTM

7. Geoff Aaron, GasGas

8. Kyle Redmond, Beta

9. Nick Thompson, KTM

10. Mike Brown, Husqvarna

11. Max Gerston, Beta

12. Trystan Hart, Husqvarna

13. Eric Rhoten, Yamaha


2016 EnduroCross Final Point Standings

201 - Colton Haaker, Husqvarna

192 - Cody Webb, KTM

127 - Ty Tremaine, KTM

126 - Mike Brown, Husqvarna

116 - Kyle Redmond, Beta

111 - Cory Graffunder, KTM

104 - Max Gerston, Beta

100 - Noah Kepple, KTM

97 - Trystan Hart, Husqvarna

90 - Geoff Aaron, GasGas

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

K&N-Sponsored Rider and Driver Sara Price Presented Prestigious Rising Star Award

Price on motocross bike

K&N-sponsored Sara has been a trailblazer and top competitor in motocross

The 2016 Off-Road Motorsports Hall of Fame Ceremony was a big night for K&N-sponsored racer Sara Price. The ceremony, which was held at the South Point Resort in Las Vegas, is primarily a source of recognition for individuals who have amassed a lifetime of accomplishments and contributions in the sport of off-road motorsports and racing.

However, the event also takes time to identify and award the sport’s up-and-comers. Sara Price was awarded the Rising Star award in the category of Motorcycle/ATV/UTV. Price was truly surprised by the award as the winners are not announced until the ceremony. The recognition is a huge honor since it is voted by members the Off-Road Motorsports Hall of Fame.

Price and Super Truck

Price is making waves in the Super Truck world

Price's career is on an incredible ascent in the off-road racing world. She got her start racing motocross and became the first ever factory supported female racer under Monster Energy Kawasaki. Price became a multiple-time national champion in motocross and a repeat X-game medalist. She has been a trailblazer for women in off-road racing.

The talented racer doesn’t want to be defined just by gender, despite the fact that she has the looks and poise to have been a finalist in beauty contests. “Growing up I always raced against the boys in motocross,” says Price, “I get a lot of respect; the guys know I’m there to compete. That’s what I want to be known for, my talent, skill and the hard work I put in — not because I’m the only girl.”

Price signing autographs

As a true cross-discipline racer, Price has a boatload of talent

2016 has been a banner year for Price. She has expanded her competitive horizons into the Super Truck racing world. Here is another venue in which she has proven to be a trailblazer. The 24-year-old was selected to race in Australia’s Gold Coast 600 and was the only female on the starting grid. Price again showed her toughness after being involved in a violent crash in qualifying then hitting the wall hard in the first race. She was ready to race in the next event, but officials determined after the post race inspection that her truck's fuel cell had enough damage to it where it was not safe to compete in the race. Despite the frustration of being sidelined in the GC 600, Price’s future is bright in Super Truck racing. Look for big things from her in 2017.

Sara Price is truly a Renaissance woman. She’s a motocross and Supercross racing standout, a UTV Champion, an X-Games medalist, a Super Truck driver, a beauty contestant, and stunt woman. K&N is proud of Sarah and excited to continue to support and sponsor her in her pursuit of motorsports world domination!

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Testing the K&N BM-1113 Air Filter for the BMW R1200GS in the Death Valley Dirt

The R1200GS on a Death Valley dirt road

Death Valley is a prime testing environment for an air filter

The 12,000-mile service on the new liquid cooled BMW R1200GS is a big one. It’s the maintenance milestone that requires a valve check/adjustment, spark plug replacement, engine and drive oil change, various system checks, and an air filter replacement. That final one is the focus of this piece.

I have used K&N oil filters for years because I trust the quality, and I appreciate the 17mm nut on the filter body for easy replacement. I have also used a full range of K&N air filters on my street-only performance motorcycles. However, the GS is an adventure (ADV) bike that I ride in a full spectrum of conditions over a variety of surfaces including dirt. I have been wary of using anything but the stock paper filters in the air-boxes of any of my adventure mounts (I have owned nearly a dozen ADV motorcycles of various brands).

K&N BM-1113 and stock filter side-by-side

A side-by-side comparison of the filters emphasizes the K&N's build quality

As is my modus operandi, I did careful research on the K&N air filters that are intended for dual-sport duty. I studied K&N’s filtration testing protocols and the resulting test data. I considered the ways K&N’s engineers added extra layers of tightly-woven cotton gauze filter media for the more demanding duty of adventure riding. I noted the filter body’s sealing bead and overall construction. In the end, I felt fully confident that K&N had developed a filter element that would add a higher level of airflow to the GS’s big cylinders, while still providing excellent filtration to protect the engine.

Comparing the K&N BM-1113 alongside the stock paper filter, the K&N’s build quality and well-designed sealing surface are notable. It has a more rigid body than the stock filter element, but the sealing surface is pliable making for a reassuring fit into the GS air box. The K&N filter fits perfectly into the air box’s support frame and seals up well when the lid’s four bolts are torqued into place. Of course, the final step in the easy and quick installation is the application of the K&N “do not discard” sticker on the air box cover.

K&N BM-1113 in the R1200GS airbox

The K&N is a perfect fit in the GS air box and the seal is secure

So with the 12,000 mile service complete, including the installation of the K&N BM-1113, it was time for an adventure. The filter’s first ride would be a 1000-mile journey that would include an exploration of Death Valley, including miles of the region's dirt roads. Since Death Valley boasts the lowest point in the United States, the filter’s performance in low elevations would be tested. The ride would also include an extended high-speed freeway leg, and finally a twisty climb into 9000 foot elevation of Arizona’s San Francisco Peaks. That is clearly a viable real-world test of a filter’s performance.

So how did the filter perform? On the road, my seat-of-the-pants conclusion was that the filter’s airflow smoothed out the bike’s annoying hesitation when accelerating from about 4000 RPM. The roll-on performance was smoother and stronger. Yes, I know it is only seat-of-the-pants testing, but I will tell you that my seat spends countless hours and miles in the saddle, so I get to know my bike very well. I will vouch for the noticeable improvement in mid-range performance on the GS.

The BMW R1200GS in Death Valley

ADV bikes have multi-surface capability which requires effective filtration

As far as my overall performance impressions, they too are very favorable. The ride included an elevation change of over 9000 feet. The bike performed flawlessly at the negative 282 foot elevation of Death Valley and the heights of the northern Arizona mountains. An especially notable performance boost was the crispness of the bike’s throttle response at the highest elevations. Clearly the added airflow helped in the thin mountain air.

Upon returning home, I removed the K&N from the air box for a post ride inspection. The filter’s seal was secure and the element looked perfect. Of course the air box was spotless. I have no reservations about running the K&N BM-1113 for the next 100,000 miles that I expect to keep the big GS. I am also more than pleased that I can wash and re-oil the filter after a particularly dirty ride, rather that trash a paper filter. This adventure rider is now a convert.

For all K&N air filters for BMW R1200GS models, visit the BMW R1200GS Air Filters page.

BM-1113 filter and K&N sticker

The re-usability of the K&N filter is a big bonus for adventure riders

The author at Death Valley's lowest elevation

The filter performed well through extreme elevation changes

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

K&N Racing Assembly Combines Durable Construction With Superior Performance

The K&N 100-8593 Custom Racing Assembly.

The K&N 100-8593 custom racing assembly offers maximum airflow for greater horsepower.

Racers are always looking for something that gives them the edge over their competition and the K&N 100-8593 custom racing assembly is one component that assists.

It includes an air box constructed of ultralight and durable K&N generation 2 carbon fiber that is durable enough to take the extreme vibrations and engine heat that always results from achieving maximum speed. Yet, as it withstands the upheaval it delivers superior airflow and is designed to increase horsepower. The rectangular air filter features multiple layers of cotton gauze media, which has been treated with a special grade of filter oil that make the strands of the cotton extremely sticky.

The air box has air horn seals for better insulation and easy installation. It is ideal for racers who drive racecars that use traditional multi-Siamese stacks.

It’s no accident that K&N uses carbon fiber in the construction of the assembly. The composite has been treated to deal with extreme heat from less than 0° up to 2500° Fahrenheit and is engineered with specific resin systems for application specific needs. To work properly there has to be a balance of fire retardant resins and ceramic blends so the component can withstand the intense heat and yet be flexible enough to avoid damage.

Matt Coffman drift car with K&N sprint car air box installed

Many racers choose K&N sprint car air boxes because of their lightweight design and added airflow

K&N offers a wide assortment of universal air box assemblies including:

• Small Sprint

• Medium Sprint

• Solid Medium Base

• Medium 4-inch Height

• Large Sprint

• Large Side Filter

• Large Base Plate

• Large Carbon Fiber

Installation is easy. Simply place the base and air horn seals, then slip the main filter assembly over the stacks and secure with the supplied spring clip clamps. K&N also offers an air filter cleaning kit that is specially formulated to cleanse the filter when necessary and recharge it so it can be reused.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

English Legends Champ Heads to the U.S. to Recapture His World Crown

The bright orange Mickel Motorsports entry is hard to miss on UK circuits

Forget about British reserve, this car can be spotted from the International Space Station

As strange as it seems, as you’re reading this there’s a team from Great Britain traveling to the American South to race scale replicas of dirt track stock cars of the 1950s and 1960s bodied in the shells of two-door coupes and four-door sedans of the 1930s.

The story actually starts in 1992, when many short tracks had allowed the cost of competition to escalate out of control with variable and sometimes unclear rules. Car counts began to drop drastically, and at that moment, track officials estimate that 30% to 40% of the racecars in North America were not in use because of cost.

What was needed was an affordable racecar that required little maintenance time and cost. Recognizing the need was the team at Charlotte Motor Speedway, who researched the problem. As a result of this research, in January 1992, US Legend Cars International, Inc. was launched and in April of 1992, the first Legends Car was unveiled. Currently they are the largest mass producer of racecars in the world.

John Mickel is 2015 and 2016 UK Legends Champion

UK Champion John Mickel heads to the US to defend his World title

While the intention was for Legend cars to compete on short paved and dirt ovals, they started appearing in other situations. You can find them today running on race tracks with NASA, SCCA, and other groups. And they’ve spread across the globe as well. In Finland they’re raced on road courses in the summer and on frozen lakes in the winter. In addition to the UK, where our friends are from, there have also been series in France, Mexico, Belgium, Spain, and Australia.

In most of the countries, an infrastructure of paved or dirt ovals doesn’t exist, so the Legends cars are raced on road courses. In the UK, there are 15 rounds held on tracks that hosted Formula 1 races like Silverstone, Brands Hatch, and Donington Park are on the schedule as well as club circuits likes Pembrey and Anglesey.

Three races are held – two heats and a final – at each round of the championship, with the heats lasting between 7 and 12 laps depending on the circuit, with the final a few laps longer. The grid for race one is drawn by lots, with the reverse for heat two, and in the final the grid is formed by the reverse of the drivers points in the previous two races – meaning the most successful driver will start near the back. In each race, however, all rookies start at the back of the grid.

K&N filters improve the performance of the Yamaha engines used by all Legends cars

You can catch a glimpse of a pair of K&N RC-3510 air filters under the hood

This year’s UK champion is John Mickel who took the 2015 championship as well. “I'm really pleased to win it again especially as winning last year makes it back to back titles. Every year it gets harder. My 19 years of experience in Legends Cars keeps me fighting at the front and of course using the best equipment like K&N Filters helps.

John is bringing his winning number 4 K-Seal Legend car to the States, to be defending his world title and he’s excited to be doing so. “The USA is where the Legends cars were designed and first raced," he said. “It's like bringing the car home. Racing against the best of the best from each state of the USA plus drivers from Russia, Georgia, Sweden, Finland and winning both the World Title and the World Points Series last year, I just had to come back and defend them both in 2016.”

John’s no newbie to racing in the US. He spent several years trying to put together a NASCAR truck program, budget limiting him to running only a handful of races each year. So he turned his focus back on the UK and dominated ever since.

So how does a car from the UK compete with a car from the US or Russia or Finland? Machinery is kept evenly matched around the globe by all chassis and components manufactured only by US Legend Cars International, Inc. In addition every car is powered by a sealed Yamaha engine. With so much controlled by the organizers, small allowed differences can make a big difference. According to John, “engine costs are a big part of our budget, and using the best equipment available has always been cost effective. That’s why I have used K&N air and oil filters for over 30 years, because they’ve never let me down.” Just for the record, each car in John's stable is equipped with a pair of K&N RC-3510 filters.

While our focus has been on John as he heads for the World Championships, there are other members of his team that have plenty to celebrate themselves. Paul Simmons was crowned the 2016 UK National Masters (over 40) Champion in his black #51 Baileigh Industrial-sponsorsed machine, while the #3 K-Seal car shared by Mike Schlup and John Patterson won the 2016 UK Team Car National Championship title.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N