K&N Air Intake Performance Upgrade for 7th Generation Chevrolet C7 Corvette Stingray

K&N air intake system for seventh generation Chevy Corvette 6.2L models is here

2014-2016 Chevy C7 Corvette Stingray owners can stop searching for cold air intakes as the K&N performance air intake system for seventh generation Chevy Corvette 6.2L models is here

The 2014-2015 Chevrolet Corvette incorporates cutting edge technology in the 6.2-Liter LT1 V8

The 2014-2016 Chevrolet Corvette incorporates cutting edge technology in the all-new 6.2-Liter LT1 V8 boasting 460 horsepower, 0 to 60 MPH in 3.8 seconds, and an EPA estimated 29 highway MPG

Chevrolet introduced the Corvette in 1953 and turned the American automobile market upside down. Few people could have guessed how much the Corvette would impact cars and drivers for generations to come. Now in its seventh generation of production, also referred to as C7, the Chevrolet Corvette incorporates cutting edge technology such as the all-new 6.2-Liter LT1 V8 engine. Chevrolet boasts 460 horsepower, a zero to sixty mph time of just 3.8 seconds, all while averaging an EPA estimated 29 highway miles per gallon.

While the 6.2L LT1 engine found in 2014-2016 Chevy Corvette Stingray models is certainly no slouch in stock trim, many owners are searching for a cold air intake to increase power. If you’re that owner, look no further than the K&N performance air intake system for 2014-2016 Chevy Corvette 6.2L models. The K&N air intake 63-3081 is expert-engineered and guaranteed to increase horsepower and torque. It replaces the restrictive factory air filter box system and accordion hose with a free-flowing, high-density polyethylene air intake tube to help minimize restriction, straighten, and increase airflow to the engine. More air, and less restriction, means more usable power throughout the engine’s RPM range.

When installed on a 2014 Chevrolet Corvette 6.2L K&N air intake improved power

When installed on a 2014 Chevrolet Corvette 6.2L, K&N air intake number 63-3081 improved power across the entire RPM range with an estimated gain of over 12 HP and 16 lb-ft torque

The K&N air intake system for 2014-2015 Chevrolet Corvette Stingray

The K&N air intake system for 2014-2016 Chevrolet Corvette Stingray models replaces the stock air filter box with a carbon fiber top air filter and rotational molded HDPE air intake tube

A custom made carbon fiber top and bottom K&N air filter RP-5285 is fitted to the inlet of the K&N 2014-2015 Chevy Corvette Performance Air Intake System to provide excellent airflow rates as well as outstanding filtration efficiency. The filter is washable and reusable and can go up to 100,000 miles between cleanings, depending on driving conditions. Additionally, the 2014-2016 Chevy Corvette 6.2-liter K&N air intake system incorporates a heat shield which helps to direct relatively cold air entering through the factory inlet into the K&N carbon fiber top and bottom performance air filter.

The K&N performance air intake system for 2014-2016 Chevy C7 Corvette Stingray 6.2L models produces notable horsepower and torque increases worthy of the all-new 6.2L LT1 V8 engine. On the dyno, when installed on a 2014 Chevrolet Corvette 6.2L, the K&N 63-3081 Performance Air Intake System produced an estimated 12.51 more horsepower at 4,998 rpm and 16.63 pound-feet of torque at 4,004 rpm. That’s a noticeable increase in power that can be taken advantage of when passing, merging onto a highway, or navigating the infamous corkscrew at Laguna Seca during a track day.

The 6.2L LT1 V8 engine found in 2014-2015 Chevy Corvette C7 Stingray models

The 6.2L LT1 V8 engine found in 2014-2016 Chevy Corvette C7 Stingray models replaced the outgoing 6.2L LS3 engine found in C6 corvettes while improving power and fuel economy

K&N intake system improves power and engine in the 2014-2016 C7 Corvette Stingray

Installation of a K&N intake system improves power and engine sound by replacing the 2014-2016 C7 Corvette Stingray’s maze of convoluted air intake tubing and sound baffling

The K&N performance air intake system for 2014-2016 Chevy Corvette 6.2L models is an easy to install performance upgrade that can be installed in about 90 minutes or less using basic hand tools, and by following K&N’s simple step-by-step instructions. It maintains all necessary factory connections and does not require any additional modifications be made to the vehicle. K&N backs its 2014-2016 Chevy Corvette 6.2L air intake system with the famous K&N Million Mile Limited Warranty so owners can rest assured that their intake system can stand up to tough conditions.

K&N performance air intake 63-3081 is guaranteed to provide an increase in horsepower and torque for the Chevrolet C7 Corvette models listed below:

2016 Chevrolet Corvette 6.2L V8
2015 Chevrolet Corvette 6.2L V8
2014 Chevrolet Corvette 6.2L V8

Please use the search by vehicle tool to find all K&N products and air intakes for your Chevy Corvette.

 
 

K&N PRODUCT SEARCH K&N Filters Logo WHERE TO BUY K&N