The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Ford "Super Duty" model was redesigned in 2005. Changes include a new
interior, new grille, factory installed trailer brake controller and upgraded
engines.
Air Filter for Ford F250 / F350 Super Duty
For the engine, K&N Engineering has designed a new
Lifetime Replacement Air Filter (33-2313)
for the 2005, 2006 and 2007 Ford F350 Super Duty 6.8L V10 and 2005, 2006 and 2007 Ford F250 Super
Duty 6.8L V10.
K&N Filters are custom designed to fit in the factory air boxes. The drop-in
design means adding performance is simple; just remove the disposable air filter
in the Ford F250 or Ford F350 and replace it with a K&N Air Filter.
The washable, reusable, high flow flat panel air filter is designed to increase
horsepower and acceleration, while providing excellent filtration. The 33-2313
is 1 inch in height (25mm) with an outside length of 15.313 inches (389mm) and
an outside width of 7.25 inches (184mm).
Unlike disposable filters, K&N Air Filters use a unique pleated design comprised
of an oiled cotton fabric sandwiched between two layers of epoxy-coated aluminum
screen. The filters capture airborne dirt particles while allowing high volume
air flow. These particles then cling to the outside of the filter and become
part of the filtering media.
Also, K&N's stock replacement air filters for street vehicles are covered by our
famous K&N Million-Mile Limited Warranty and will be the last air filter your
vehicle will ever need. K&N invented the concept of washable, reusable filters
more than 35 years ago.
A refined retro look and more power define the new 2006, 2007, 2008 and 2010 Chrysler PT Cruiser. The
crossover utility vehicle has a redesigned interior with a new instrument panel
and a new center console. Horsepower has been increased on the high output
turbo, now rated at 230 with 245 lb.-ft of torque.
Air Filter for the 2006, 2007, 2008 and 2010 Chrysler PT Cruiser
K&N Engineering has released a new Lifetime Replacement
Air Filter (33-2351)
for the 2006, 2007, 2008 and 2010 Chrysler PT Cruiser 2.4L L4. The K&N Air Filter is custom designed
to fit in the factory air box. The drop-in design means adding performance is
simple, just remove the disposable air filter in the Chrysler PT Cruiser
and replace it with K&N's Air Filter (33-2351).
The washable, reusable, high flow flat panel filter is designed to increase
horsepower and acceleration while providing excellent filtration. The 33-2351
is 1.125 inches in height (29 mm) with an outside length of 10.063 inches (256
mm) and an outside width of 6.313 inches (160mm).
Unlike disposable filters, K&N Air Filters use a unique pleated design comprised
of an oiled cotton fabric sandwiched between two layers of epoxy-coated aluminum
screen. The filters capture airborne dirt particles while allowing high volume
air flow. These particles cling to the outside of the filter and become
part of the filtering media.
K&N Air Filters for street vehicles are covered by our famous K&N
Million Mile Limited Warranty and will be the last air filter your vehicle will
ever need.
It has a distinctive style and is capable of 410 lb. -14 of torque. The 2006
Jeep Grand Cherokee is the new benchmark performance SUV that provides a
comfortable ride and easy handling.
AirCharger Air Intake for Jeep Grand Charokee and Commander
K&N Engineering, Inc. has made air intake system 57-1549 for 2005 to 2010 Jeep Grand Cherokee 5.7L V8 and 2006 to 2010 Jeep Commander 5.7L V8.
K&N test have shown an estimated horsepower gain of 15.3 at 5046 RPM with the 57-1549 Air Intake Kit. "This is the first jeep to have a hemi," said K&N Performance Kit Manager Bert Heck. "We made an intake that has very good power and now K&N has the whole jeep line covered."
K&N's (57-1549)
rotationally molded polyethylene intake kit uses a conical shaped High-Flow Chrome Top Air Filter (RF-1048) that can fit into the engine compartment using factory holes and mounting points.
It takes less than an hour to install this kit and the lifetime K&N Air Filter performs for up to 100,000 miles before service is required depending on driving conditions.
The 2005 Dodge Magnum has its own classification, it's not a station wagon it is
a sports-tourer wagon. The Magnum is cast on a new platform of large-car scale
with a powerful engine mounted up front and all torque directed to the back
tires. This is the first rear-wheel drive car from the Dodge brand in nearly 20
years.
Air Intake for 2005, 2006 and 2007 Dodge Magnum and Chrysler 300
K&N Engineering can make the Dodge Magnum add horsepower with a new 57-Series
Generation II Fuel Injection Performance Kit (57-1543).
The FIPK is for the 2005, 2006, 2007, 2008, 2009 and 2010 Dodge Magnum 3.5L V6 and the 2005 through 2010 Chrysler 300 3.5L V6.
K&N's Dyno tests show an estimated 11.6 horsepower gain at 6215 RPM.
The 57-Series Air Intakes (57-1543)
features three main aerodynamically engineered components: a famous K&N
High-Flow Replacement Air Filter (RF-1048), a metal heat shield and a
rotationally molded polyethylene intake tube that has been routed for optimal
performance.
"With this kit (57-1543)
K&N now has an FIPK for all three engine sizes in the Magnum," said K&N
Performance Kit Manager Bert Heck. "It's a very simple kit to install."
The K&N FIPK also includes illustrated instructions along with all the mounting
hardware. The average owner can bolt on the 57-Series FIPK in less than 90
minutes with simple hand tools. It also comes with the famous K&N Million Mile
Limited Warranty.
The K&N High-Flow Replacement Air Filter (RF-1048)
can be repeatedly washed and re-oiled with a K&N cleaning kit. Service
intervals can be up to 100,000 miles (depending on driving conditions).
Jeep's redesigned 2005 Grand Cherokee 3.7 liter V6 produces more peak power
than the 4.0 liter l-6 engine it replaced, while producing comparable torque.
The engine was first introduced on Jeep Liberty and Dodge Ram models, and shares
many design features with the 4.7 liter Power Tech V8 engine.
Air Intake Kit for 2005, 2006 and 2007 Jeep Grand Cherokee
K&N Engineering has designed a new Generation II 57-Series
Fuel Injection Performance Kit (57-1545)
that will add power to the 2005, 2006, 2007, 2008, 2009 and 2010 Jeep Grand Cherokee 3.7L V6.
Dyno-testing revealed that this K&N FIPK (57-1545)
added 7.35 horsepower at 5132 RPM. By replacing the restrictive factory airbox
your engine will get more air with less restriction.
"This is a great power gain for a 3.7 liter motor," said K&N Performance Kit
Manager Bert Heck. "More air means more usable power and acceleration throughout
the engine's RPM range."
K&N began with one of its famous Replacement Air Filters (RF-1048).
The Air Filter can be washed and re-oiled with a K&N cleaning kit.
The K&N filter attaches to an aerodynamically designed intake tube that's made
of rotationally molded polyethylene. This allows the free-flowing tube to be
routed for minimal turbulence and also helps keep engine compartment heat out.
Installation is easily completed for this FIPK (57-1545)
in 90 minutes or less with simple hand tools. No drilling is required, and the
57-Series includes illustrated instructions as well as all the necessary
mounting hardware. It also comes with K&N's famous Million Mile Limited
Warranty.
