The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Cavalier Ecotec proved to be a consistent sales leader for Chevrolet. It was on the market for more than two decades and is still a popular vehicle.
K&N air intake system 69-4510Ts for Chevrolet Cavalier Ecotec and Pontiac Sunfire Ecotec
K&N has designed a performance intake kit (69-4510TS) in powder coated silver for the 2002, 2003, 2004 and 2005 Chevrolet Cavalier Ecotec with a 2.2 liter engine along with the 2002, 2003 and 2004 Pontiac Sunfire Ecotec with a 2.2. liter engine. See the complete list of vehicles below.
69-4510TS prototype installed in a 2002 Chevrolet Cavalier with a 2.2 liter engine
Dyno chart for 2002 Chevrolet Cavalier
The finish gives this K&N system an OE appearance. Along with good looks K&N dynamometer tests show an estimated 5.38 horsepower increase at 5223 rpm. The mandrel bent tube has a fitting to allow the use of the factory air temperature sensor.
A K&N lifetime replacement air filter (RU-4960)
comes with the intake. This K&N air filter is washable and reusable and can go up to 100,000 miles before cleaning is required. The
69-4510TS
air intake provides unrestricted airflow and superior filtration. It also has lower restriction than the factory air box and is designed to improve engine performance.
An illustrated instruction sheet is included to help guide you through each step of
installation which can be done in 90 minutes or less. The entire air intake system is covered by K&N’s famous Million Mile Limited Warranty.
Automotive Aftermarket Industry Week is coming to Las Vegas, Nevada and K&N will have a booth
filled with products and information at AAPEX (Automotive Aftermarket Products Expo) from November 4th through November 6th.
AAPEX has a special segment called the Green Way which showcases environmentally friendly products
Nearly 120,000 automotive industry professionals from all over the world attended AAPEX at the Sands Expo Center in 2007.
K&N’s booth number 2266 will showcase its products to auto parts professionals
that are focused on replacement parts for retail sales as well as sales to automotive service providers. Manufacturers, wholesalers, warehouse distributors, jobbers, independent service providers, technicians, parts store
managers, manufacturers' reps, exporters, and importers attend AAPEX every year.
AAPEX is held at the Sands Expo Center in Las Vegas, Nevada
K&N will focus on educating attendees on their product line, company
history and why attendees might choose to partner with K&N. AAPEX is smaller than SEMA (Specialty Equipment Marketing Association) but similar. It features every major brand of replacement parts and
the Green Way which highlights environmentally friendly products. K&N air filters are washable and reusable and are a good alternative to disposable air filters.
United States and international buyers from 149 countries representing all segments of the automotive market are expected to attend in 2008. For K&N it’s a great venue to interact with
distributers, retailers, and automobile manufacturers. AAPEX showcases what cars need to function
including air filters. K&N will be ready to suggest using their lifetime
washable air filter in place of typical disposable paper air filters.
Jeremy McGrath will sign autographs in the K&N booth at SEMA
Rally car and X Games Racer Andrew Comrie Picard will also be at the K&N booth at SEMA in Las Vegas, Nevada
Top drifter Vaughn Gittin Jr. and his Falken Ford Mustang 650 hp muscle car
K&N will be in booth number 22943 at SEMA 2008 in the Central Hall at the Las Vegas Convention Center
Hot Wheels Designer will autograph and give away limited edition K&N 1970 Plymouth Barracuda collector cars at K&N booth
K&N will have even more displays and activities at this year's premier automotive specialty products trade event. K&N’s booth at SEMA (Specialty Equipment Marketing Association) in Nevada will be in the Las Vegas Convention Center in the Central Hall at
booth location 22943.
Visitors in the automotive, truck, SUV, marine and RV markets will have the opportunity to visit over two million square feet of exhibits
at SEMA. K&N has sold more than 30 million high performance air filters since 1969. Our booth will show an extensive product line, have celebrity autograph sessions and
several eye catching vehicles. Some of the new products on display will be our
air intake system (69-7071TS)
for the 2002- 2008 Nissan 350Z, our air intake system (57-1559) for the 2008 Jeep Liberty and our air intake system (57-3066) for the 2007 through 2010 GM Turbo Diesel.
The SEMA show begins Tuesday, November 4 and ends Friday November 7. On Wednesday, November 5th from 10:30 am until noon Hot Wheels designer Jerry Thienprasiddhi will autograph and give away 1000 limited edition K&N 1970 Plymouth Barracuda collector cars. If you miss him on Wednesday, he will be back on Thursday, November 6th from 1:30 pm until 3 pm.
Seven time Supercross champion and CORR Pro-2 race car driver Jeremy McGrath will be at K&N’s booth on Wednesday, November 5th from 1 pm until 2 pm. Two-time D1 Drifting champion Vaughn Gittin Jr. will sign autographs on Thursday November 6th from noon until 1 pm. Rally car driver and X-Games racer Andrew Comrie-Picard will be at the K&N booth from 1pm until 2 pm on Tuesday, November 4th.
K&N will also showcase motorsports and for the first time showcase never before seen photos of our facility in Riverside, California. K&N has an extensive product line and
some of our SEMA displays will highlight the features and benefits of these product lines
as well as the marketing that K&N executes to drive traffic to our dealers.
The Infiniti G35 is high-tech with a standard smart key where the doors unlock automatically in the presence of the key and you can start the car with a push of a button.
Air intake system for the 2007 and 2008 Infiniti G35 Sedan
2007 G35 Infiniti Sedan
K&N has designed a performance air intake system (69-7082TS) with a powder coated silver finish for the 2007 and 2008 Infinity G35 sedan with a 3.5 liter V6 engine.
69-7082TS K&N air intake system installed in 2007 G35 Infiniti Sedan
Dyno chart for 2007 G35 Infiniti sedan with a 3.5 liter V6 engine
K&N dynamometer tests show an estimated 8.13 horsepower gain at 5960 rpm. The G35 Sedan is
a dual throttle body car, and the K&N air intake system is also dual to match
the stock system. There are two short ram intake systems with powder coated
aluminum tubes, K&N high flow lifetime replacement air filters (RU-4960) and powder-coated steel heat shields
that come as part of the
69-7082TS.
In addition to power gains, K&N air intake systems are also designed to increase
filtering capacity and improve throttle response. The heat shields are
engineered to isolate the oversized K&N high flow air filters from engine bay
heat. This intake also makes use of the G35's engine design by locating the
individual K&N air filters in the front corners of the vehicle where outside air
is directed at them.
The Mass Air Sensor adaptors are precision CNC machined, 6061 billet aluminum for accurate Mass Air Flow sensor readings.
It takes about 90 minutes to
install this K&N air intake
system. It does not remove the stock engine cover which keeps a clean look under the hood. This K&N air intake system, like all other K&N air intake systems is backed by the famous K&N Million Mile Limited Warranty.
K&N 63-9032-1 air intake system for the 2007 to 2009 Toyota Tundra and 2008 to 2009 Toyota Sequoia
Dyno chart for 2007 Toyota Tundra with 63-9032-1
K&N air intake system 77-9032 for the 2007 to 2009 Toyota Tundra and 2008 to 2009 Toyota Sequoia
Dyno chart for 2008 Toyota Tundra with 77-9032KP
K&N air intake system 63-9032-1 installed in a 2007 Toyota Tundra
K&N air intake system prototype (77-9032-1KP) installed in a 2008 Toyota Tundra
The 2007 to 2009 Toyota Tundra and 2008 to 2009 Toyota Sequoia with 4.7 liter V8 engines have the option of gaining additional horsepower with K&N air intake systems.
K&N's air intake system, part number 63-9032-1, produces 8.09 horsepower at 4717 rpm. It replaces the factory air box and air path leading to the engine. In its place, a K&N oversize conical air filter is mounted inside a powder coated
steel heat shield that isolates the filter from the rest of the engine compartment. The filter supplies clean and unrestricted air flow to a rotationally molded intake tube which has been shaped to optimize air flow to the engine.
The factory mass airflow sensor is relocated into the K&N intake tube using a special adaptor, and no reprogramming or computer modifications are necessary when using this system. The intake system offers more performance while providing excellent filtration.
The oversize, chrome top washable and reusable RF-1041 air filter supplied with the intake offers the best balance of high air flow and filtration efficiency. Inside the filter, multiple layers of cotton are treated with 1.67 ounces of K&N air filter oil, which traps and holds dust particles while allowing air to pass by with little restriction. The filter's size allows it to go up to 100,000 miles before cleaning is necessary.
The 63-9032-1 attaches using existing
factory mounting points, and requires no cutting or drilling. It has more of a factory look and can be easily installed in 90 minutes or less with a socket set, wrenches, and screwdrivers. The system is also backed by K&N's Million Mile Limited Warranty.
If you are interested in a flashier look, K&N has also designed a polished High-Flow Air Intake System 77-9032-1KP for the 2007-2009 Toyota Tundra 4.7 liter V8 engine and the 2008 and 2009 Toyota Sequoia.
K&N dynamometer testing shows an estimated 8.99 horsepower gain @ 4717 RPM. K&N's air intake design has lower restriction than the factory air box system resulting in an immediate power gain while providing excellent air filtration.
A rubber top K&N High Flow Air Filter RU-5045 allows free flowing air into mandrel bent aluminum intake tube. Inside the filter, multiple layers of cotton are treated with 5.03 ounces of K&N air filter oil, which traps and holds dust particles while allowing air to pass by with little restriction. This filter's size
also allows it to go up to 100,000 miles before cleaning is necessary.
The heat shield assembly is installed into the engine compartment using factory mounting points. A tube mounting bracket supports the intake tube which is mounted to the engine. The heat shield isolates the K&N
air filter from the engine compartment and allows it to receive a consistent
flow of fresh air.
The installation of 63-9032-1 and 77-9032-1KP intake systems can easily be accomplished in 90 minutes or less and these air
intakes are backed by the K&N Million Mile Limited Warranty.
