Latest News

2010-2015 Chevrolet Camaro 6.2L Gain Estimated 18 HP with Simple K&N Performance Addition

The 2010, 2011, 2012, 2013, 2014 and 2015 Chevrolet Camaro models are legendary among enthusiasts and consumers. As one of America’s favorite muscle cars, it offers old school looks and new school performance. K&N’s air intake system offers even more power to your pony car that will match its bad boy looks.

K&N's 69-4519TP air intake system for the 2010, 2011, 2012, 2013, 2014 and 2015 Chevrolet Camaro with a 6.2 liter V8 engine
K&N's 69-4519TP air intake system for the 2010, 2011, 2012, 2013, 2014 and 2015 Chevrolet Camaro with a 6.2 liter V8 engine

Black 2010 Chevrolet Camaro
2010 Chevrolet Camaro
K&N performance air intake kit, part number 69-4519TP for the 2010, 2011, 2012, 2013, 2014 and 2015 Chevrolet Camaro with a 6.2 liter V8 engine provides an incredible 18 horsepower increase at the rear wheels.
K&N air intake system installed in 2010 Chevrolet Camaro
K&N air intake system installed in 2010 Chevrolet Camaro


Dyno chart for 2010, 2011, 2012, 2013, 2014 and 2015 Chevrolet Camaro 6.2L
Dyno chart for 2010, 2011, 2012, 2013, 2014 and 2015 Chevrolet Camaro 6.2L

K&N’s Research and Development Department tested a 2010 Chevrolet Camaro SS with a 6.2 liter V8 engine on one of our in house dynamometers. Results showed an increase across the RPM range with a estimated gain of 18 horsepower at 5200 RPM.

In addition to power gains, K&N cold air intake systems are also designed to increase filtering capacity and improve throttle response. The heat shields are engineered to isolate the oversized K&N chrome top high flow air filter, part number RF-1042 from engine bay heat.

This air intake kit also makes use of the Camaro’s factory fresh air duct which provides cooler outside air to the K&N air filter. This filter captures harmful particles, increases airflow and also increases service life. It will perform for up to 100,000 miles before service is required depending on driving conditions.

The mass air sensor is installed in the 90 degree bright intake tube. The mass air sensor adaptors are precision CNC machined, 6061 billet aluminum for accurate mass air flow sensor readings.

It takes about 90 minutes to install the 69-4519TP. This K&N air intake system, like all other K&N air intake systems is backed by the famous K&N Million Mile Limited Warranty.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Canada Cup Champion ATV Racer Richard Pelchat Proud of his 2009 Season

Canadian Richard Pelchat competed in 21 ATV races in 2009 and logged 40,000 miles of travelling. "I will remember 2009 as my toughest ATV racing season ever," he said. "But overall it was a great year."

Canadian ATV racer Richard Pelchat at Montreal Supercross
Canadian ATV racer Richard Pelchat at Montreal Supercross

St. Wenceslas course ATV race for Richard Pelchat where he had a perfect win pattern
St. Wenceslas course ATV race for Richard Pelchat where he had a perfect win pattern
Can-Am X-Team ATV motocross racer Pelchat won the Canada Cup ATV Championship. Richard Pelchat also took the holeshot in both ATV moto races in the final round of the championship series aboard his DS 450. "I’m proud to win the cup for Canada," he said. "Canadians all grow up dreaming of winning the Stanley Cup for a professional hockey team. Not me, I guess the name of the championship fits us."
Richard Pelchat competed in 21 ATV races in 2009 and logged around 41,000 miles on the racing circuit
Richard Pelchat competed in 21 ATV races in 2009 and logged around 41,000 miles on the racing circuit

2009 Canadian Cup winner Richard Pelchat will defend his ATV racing title in 2010
2009 Canadian Cup winner Richard Pelchat will defend his ATV racing title in 2010

Richard Pelchat uses K&N air filter part number, CM-4508 and K&N air filter wrap, part number CM-4508DK on his race ATV. "My K&N air filters worked perfectly this year," he said. "I really like the power they provide me, plus they are so easy to use. The washing and oiling process is quick and we always have K&N filters ready for us at every event."

He followed up his ATV championship win with a strong sixth overall at the penultimate round of the 2009 ITP Moose Racing AMA ATV Motocross Championship at Red Bud Track and Trail in Michigan. Richard Pelchat had great weather at the AMA Red Bud. "It was a nice MX track," he said. "I qualified well in front of many factory riders and rode hard."

Things don't always run flawless for ATV racer Richard Pelchat, like his competition at the twelve hours of Pont-de-Vaux in France. "It is really an amazing event," said the racer. "I was teamed up with French riders Jeremy Warnia and Greg Lassigne. We had a bunch of little problems that you can’t have in order to win an endurance race. It just wasn’t our turn."

Richard Pelchat also attended the Montreal Supercross ATV race event. "I took a month off to put myself in SX mode," he said. "I changed my practice track to make it a real SX challenge. The Montreal SX is really great and I was ready for the race. Josh Creamer, John Natalie, Chad Wienen were all on the entry list, but deep down I did not fear them. I felt like I could win. Unfortunately I hurt my left shoulder during practice and the pain was so intense I had to pull out. It increased with every bump and each lap. It was a tough decision, but a smart decision to pull out of the event."

Some of the other ATV races on Pelchat's 2009 schedule were:
Walton, Canada Cup ATV Race
St. Wenceslas, Courses VTT Round 2
Southwick, NEATV Racing
Pennsylvania AMA ATV Racing
St. Seraphine Courses VTT Round 3
Lorreta Lynn, Tennessee AMA ATV Racing

Richard Pelchat will be back for the 2010 ATV race season and said he will be on the starting line with the will to win more than ever. "I will be racing in the United States for a few events," he said. "And I also plan to defend my Canada Cup."

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Teen Boy Earns New Junior Dragster after Great Performance Rookie Year

Joey McCune is not your typical teenage boy. By the time the 13-year-old starts his freshman year of high-school, he will have a new junior dragster.

Teen driver Joey McCune will get a new faster dragster for his 2010 junior dragster season
Teen driver Joey McCune will get a new faster dragster for his 2010 junior dragster season

Joey McCune won the Central Drag Racing Association (CDRA) Race of Champions at Tulsa Raceway Park in Oklahoma
Joey McCune won the Central Drag Racing Association (CDRA) Race of Champions at Tulsa Raceway Park in Oklahoma
His rookie season went so well, McCune won the Central Drag Racing Association (CDRA) Race of Champions at Tulsa Raceway Park in Oklahoma. The race showcased the best of the best junior dragsters in his area and he beat them all to earn the title of 2009 Junior Dragster Champion.
Junior Dragster teen Joey McCune will compete for cash in 2010
Junior Dragster teen Joey McCune will compete for cash in 2010

Junior Dragster Rookie Joey McCune had a good first season and plans a full race schedule in 2010
Junior Dragster Rookie Joey McCune had a good first season and plans a full race schedule in 2010

“Joey has a natural ability when it comes to driving,” said Bobbie Rader, Joey’s mother. “He had a new junior dragster in 2009 and fought it all year long, trying to get the bugs out. We let him be the decision maker on the car, we let him do the dial-ins and he made correct decisions throughout the year.”

McCune also won three races in 2009 and came in second place for five races. He also finished in second place in points at Ozark Raceway Park in Rogersville, Missouri.

“Joey has earned a faster car,” said Rader. “He is also a straight A student. I just know he’ll continue to get good grades in high-school. We have a rule about that, if his grades drop he does not get to drive.”

The family plans a full race schedule for Joey in 2010. His first race will be at Ozark Raceway Park next April where he will compete for cash prizes. “We only use K&N air and oil filters on all of our vehicles,” said Bader. “K&N protects our engines and gives us extra filtration on and off the track.”

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

K&N Extreme Duty Air Filters Provide Protection and Performance in High Dust Areas

K&N XD (Extreme Duty) air filters are built to handle the most grueling off road environments. K&N’s E-3976XD, E-3977XD, E-3979XD and E-3978XD deliver superior performance in extreme conditions such as miles of whoops, silt, sand and rocks.

K&N E-3976XD Extreme Duty air filter has outside diameter and height of 16 inches by 5 inches
K&N E-3976XD Extreme Duty air filter has outside diameter and height of 16 inches by 5 inches

K&N E-3979XD Extreme Duty air filter has an outside outside diameter of 14 inches and a height of 4 inches
K&N E-3979XD Extreme Duty air filter has an outside outside diameter of 14 inches and a height of 4 inches
The XD cotton medium was developed to provide performance and protection for race engines that endure the rigorous demands of the Baja 1000 race or races such as the Las Vegas to Reno Best in the Desert Off-Road Race.
K&N E-3977XD Extreme Duty air filter has outside diameter and height of 16 inches by 4 inches
K&N E-3977XD Extreme Duty air filter has outside diameter and height of 16 inches by 4 inches

K&N E-3978XD Extreme Duty air filter has an outside diameter of 14 inches and a height of 5 inches
K&N E-3978XD Extreme Duty air filter has an outside diameter of 14 inches and a height of 5 inches

The E-3976XD, E-3977XD, E-3979XD and E-3978XD air filters use a deep pile design, extra fine weave grade cotton and alternate geometries for added efficiency and capacity for off-road conditions.

Various K&N supported Trophy Truck teams rely on K&N XD filters to help them compete in some of the world’s most demanding proving grounds.

Macrae Glass and The Glass Chiropractic Racing Team finished first in their class in the Las Vegas to Reno Best in the Desert Off-Road Race. Glass used K&N XD air filter, part number E-3978XD, in his full sized unlimited Ford pickup truck. “I used the same K&N XD air filter in the Las Vegas to Reno BITD Race that I used to win in the Terrible’s 250 BITD Race in Primm, Nevada,” said Glass. “I didn’t clean it before the Vegas to Reno run and it still made a difference and helped me get to the Winner’s Circle again.”

The outside diameter and height of the E-3976XD is 16 inches by 5 inches. The outside diameter and height of the E-3977XD is 16 inches by 4 inches. The E-3979XD has an outside diameter of 14 inches and a height of 4 inches and the E-3978XD has an outside diameter of 14 inches and a height of 5 inches.

K&N XD air filters are cleaned the same way as K&N’s original cotton air filters. They are also warranted against defective materials or workmanship for one year from the date of purchase with no mileage limitation.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Honda CRF450 and Honda CRF250 Gain Performance with K&N XStream Motocross Air Filters

K&N XStream Series Motocross air filter part number HA-4509XD
K&N XStream Series Motocross air filter part number HA-4509XD

2009 Honda CRF450R at K&N headquarters in Riverside, California
2009 Honda CRF450R at K&N headquarters in Riverside, California


K&N XStream Series Motocross air filter part number HA-4503XD
K&N XStream Series Motocross air filter part number HA-4503XD

K&N XStream Series Motocross Air Filter part number HA-2505XD
K&N XStream Series Motocross Air Filter part number HA-2505XD

K&N XD air filters use an extra fine weave grade cotton for added efficiency and capacity needed for extreme dusty off-road conditions. This thicker filtering medium provides increased protection while it provides the performance necessary to stay in the front of the pack. K&N XD air filters were developed for the extreme conditions encountered by race teams in the Baja 1000.

K&N XStream Series Motocross air filter, part number HA-4509XD is available for your 2009, 2010, 2011, 2012, 2013 Honda CRF450R.

The HA-4503XD is also available for your 2004, 2005, 2006, 2007, 2008 to 2009 Honda CRF250R and your 2003 through 2008 Honda CRF450R.

K&N’s HA-2505XD is designed for the 2004 to 2016 Honda CRF250X and your 2005 through 2016 Honda CRF450X.

Riders can take performance to the next level with the use of a two piece air filter designed to fit specifically into your OE air box assembly. The HA-4509XD, HA-4503XD and HA-2505XD incorporate an air filter into the filter’s top and provides a larger filtration area for high airflow and increased dirt capacity in extreme conditions.

The specially designed pleated media on each filter piece provides less restriction than typical foam air filters. Allowing your engine to breathe easier can give your Honda extra horsepower and acceleration while providing excellent filtration.

The epoxy coated aluminum wire mesh incorporated into a backfire screen, protects the filter element from harmful debris. This two-piece design makes installation and removal easier for HA-4509XD, HA-4503XD and HA-2505XD on narrow MX bikes. Pliable application specific sealing beads ensure an air tight fit against the backing plate.

No cutting or fitting is required and fuel modifications are not necessary to obtain increased performance. The HA-4509XD, HA-2505XD and the HA-4503XD are covered for one year by the K&N Limited Warranty.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.