Latest News

Peter Biondo Battles Poor Weather and Wins $10,000 Purse at Atco Raceway

Jun 5, 2012

Peter celebrates with his girlfriend, Emily.

Peter Biondo is playing with house money these days. The Northeast drag racer captured the $10,000 Big Buck Bracket Race at Atco Raceway in New Jersey at the start of April, propelling him into the summer months, the most rigorous part of the season.

"Both the car and I did what we were supposed to do and the win lights just kept clicking," Biondo told K&N News. "The biggest challenge was the ever-changing wind that was playing havoc with the cars and trying to predict the performance of the car. It was nearly impossible to predict (your dial-in), as one minute you had a ten mile-per-hour cross wind, and the next minute it was a twelve mile-per-hour head wind. It wasn't a matter of getting it right; the goal was just to get closer then the other guy."

The big win, and bigger payday, couldn't have come at a better time for Biondo. The money helped Biondo and his business partner, Kyle Siepel, with the K&N Spring Fling 20's, a drag race promoted by the two in Bristol, Tennessee. "We guarantee the payout and have a lot of overhead within the event," Biondo said. "In the end, we had a massive car count, and the race went off without a hitch."

With the K&N Spring Fling 20's behind him, Biondo is excited to jump back behind the wheel, adding, "I'm looking forward to getting back on the other side of the fence again."

Biondo has been experimenting with different classes recently, including Top Sportsman and Top Dragster. Already a NHRA National Event winner in five categories, a win in either division would put Biondo in an elite, and presently, a very lonely group. Only NHRA bracket racing legend Jeg Coughlin, Jr. has won in six categories.

When Biondo gets his next Wally, it will be with the help of K&N products. "The air scoop on my dragster is K&N. When I first put the scoop and air filter assembly on, I realized a two mile-per-hour gain, as well as more consistency; I would highly recommend it. We also utilize the Wrench-Off Oil Filter, speeding up our maintenance and making oil changes a snap."

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Drag Racer Nikki Dunn Goes Enduro Racing at Arkansas' I-30 Speedway

Jun 4, 2012

Abe Neyland, publisher of Life & Home magazine lent Nikki the car and Rick Williams, proprietor of The Atrium at Serenity Pointe, backed her financially in her Enduro debut at I-30 Speedway.

Amazing 143 degree natural thermal waters with rumored magic healing powers, that's what Hot Springs, Arkansas is best known for, not racing. Although, if Lakeside High School senior, Nikki Dunn has anything to say about it, Hot Springs National Park, the first federally protected area in the national park system will be the second most famous attraction in the area.

After an engine overhaul on the borrowed Camaro and a new hot pink and black paint job, Nikki was ready to race.

"The racing bug first bit me when I was eight-years-old, which was ten years ago. My family has been racing for many years, my dad raced, and so did my grandfather," said Nikki explaining her genetically driven need for speed. "I always loved the movie Right on Track too, because it showed me that racing was not just a man's sport, it was also a woman's sport. I fell in love with racing instantly when I was young watching my dad race, and wanted a car ever since I was little."

Her dad, Ricky, was a drag racer, and that's what she's been doing for the past ten years already now. "I seem to fall more in love every time I race," said Nikki. "I love the adrenaline rush that you get for the few seconds that you are in the car. But, recently I have become a big fan of dirt track racing, which has shown me another side to racing, and I have also fallen in love with it too, because it's not just in a straight-line and you are out there for longer than just a few seconds."

It would be fair to say that Nikki simply loves all things racing, two of the racers she most admires are Danica Patrick and Ashley Force-Hood, and like her two idols, Nikki too likes to redefine perceptions and smash through limiting barriers. Nikki recently jumped from racing a quarter-mile at a time to running in her first Enduro race at I-30 Speedway in Little Rock, Arkansas. The Enduro in this case was a 200-lap race that lasted two hours, with the win going to the first car to complete all 200 laps, or the last car running. For Nikki, one of the most exciting aspects of the race was being the only female.

"My race on the 6th (May) was my first ever dirt track race, so I was in a completely different world from what I am used to," said Nikki. "My car ended up over heating after about 50 laps, so I backed off and let it cool down and then I pushed my car until it would not go no more, and that was at about lap 75."

In a car loaned to her from Abe Neyland, publisher of Life & Home magazine and with a generous race sponsorship care of Rick Williams, proprietor of The Atrium at Serenity Pointe, Nikki was able to successfully further whet her racing cravings and exercise her considerable driving skills. Nikki's dream is to someday race on the national stage, but she remains realistic about her chances, acknowledging the vast amounts of money required to live the dream.

"I would love to become an NHRA driver one day, but I have plenty to work on to get to that point," she says. "I would love to one day race with Ashley Force, but I need way more practice, an even bigger race car and more sponsorships."

Nikki says she has used a K&N air filter on all her race cars since she first began racing and she has one on her truck, and that was by choice not because she was sponsored by K&N. Although a sponsorship would be great, for now she remains grounded and focused on getting her basics out of the way at National Park Community College next year, with the goal of entering nursing school.

Team Dunn, which includes her dad Ricky, grandfather Richard, her sister Emily and family friend Cody Howerton, will race their next Enduro back at I-30 Speedway on June 24, 2012.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

2007 and 2008 Chevy & GMC 2500/3500 HD 6.0L Trucks Gain Horsepower with K&N Air Intake

Jun 1, 2012

Dyno Chart for 57-3067 air intake system.

There are many loyal K&N customers willing to purchase a performance intake system the first day that they purchase a new vehicle. This might be due the proven horsepower gains made time and time again on the K&N dyno. Design is critical when it comes to making a product the guarantees horsepower. The key is to get the straightest air flow path possible as the air makes its way into the engine. All dyno test literature comes inside the box of each K&N intake and can be found on the K&N website on the product summary page.

K&N Air Intake System for 2007-2008 Chevy and GMC 2500 HD and 3500 HD 6.0L pickups

Most factory intake systems choke down air flow and reduce engine performance. Air flow is important for big engines like the 6.0 liter powerhouse offered in 2007-2008 Chevy Silverado HD trucks. Automobile manufacturers sacrifice the power in order to quite engine noise but, most truck owners want to hear the engine roar when they mash the gas pedal. A truck is meant to perform, not spit out low emissions and sit silently at a stop light.

If you are looking for more performance out of your Silverado HD give K&N some thought. Part number 57-3067 is specifically designed to increase horsepower and torque. This K&N intake system made an estimated additional 11 horsepower and 13 lb-ft. of torque to the wheels. One simple bolt-on is all it takes to improve performance.

2007 Chevrolet 2500 HD 6.0L with K&N air intake

Part 57-3067 includes a K&N high flow air filter, detailed instruction sheet, and all the mounting hardware necessary for installation. The factory MAF (mass air flow) sensor will be used in conjunction with the K&N intake. Images are shown on the instruction sheet for easy installation. Average installation time is about 90 minutes with simple hand tools.

2008 Chevrolet 3500 HD on dyno

One additional feature of 57-3067 that can be appreciated is the washable and reusable air filter. Servicing the air filter can be done with a K&N Recharger Kit which can be picked up at your local K&N authorized dealer. A reusable product cuts down on waste and the reoccurring purchase of OEM air filters.

Since K&N is a quality reusable product it comes backed by a Million Mile Limited Warranty. If any issues arise with your intake, just give customer service a call and they will be more than happy to assist you. They can be reached at 800-858-3333.

57-3067 fits the following applications:

2008 GMC Sierra 3500 HD 6.0L V8
2008 GMC Sierra 2500 HD 6.0L V8
2008 Chevrolet Silverado 3500 HD 6.0L V8
2008 Chevrolet Silverado 2500 HD 6.0L V8
2007 GMC Sierra 3500 HD 6.0L V8
2007 GMC Sierra 2500 HD 6.0L V8
2007 Chevrolet Silverado 3500 HD 6.0L V8
2007 Chevrolet Silverado 2500 HD 6.0L V8

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

2011, 2012, 2013 and 2014 Ford Mustang Gets Estimated 11 HP with Easy Performance Add-on

Jun 1, 2012

K&N Air Intake System for the 2011 to 2014 Ford Mustang 3.7L V6.

The redesigned Ford Mustang that started in 2011 and has progressed into 2012 and 2013 is showing itself to be an impressive vehicle. The Mustang has always been one of the great sports cars but Ford has been revamping the engine and chassis with new technology on an almost yearly basis. Its new 3.7 V6 is now putting out only 10 horsepower less than the previous V8 model and torque has seen a significant improvement as well. All of these improvements don't mean there is no room for just a little more power at the rear wheels though. K&N's 69-3529TP performance air intake system is designed just for that boost in power.

Dyno Chart for the 69-3529TP air intake system

K&N Typhoon intake systems are designed to increase horsepower and torque at the real wheels while maintaining the filtration necessary to protect the engine and ensure long life. They all use K&N washable and reusable air filters and the entire intake system is backed by K&N's Million Mile Limited Warranty. This intake system includes full instructions and will only require only a few basic tools for installation. The installed kit will increase engine sound slightly to have a beautiful sonic experience accompany the additional horsepower.

In this case the new intake pays off with an estimated additional 11.79 horsepower and 13.79 lb-ft of torque all measured at the rear wheels. The 69-3529TP intake system uses a closed box to protect the air filter from hot air under the hood and to control incoming air flow. This box uses a removable top to make filter maintenance and inspection simple and easy. The intake air filter can go for up to 100,000 miles before cleaning is necessary depending on driving conditions so you won't need to inspect it for while.

The 69-3529TP air intake system fits the following Ford Mustang models.

2014 Ford Mustang with 3.7 liter V6 engine
2013 Ford Mustang with 3.7 liter V6 engine
2012 Ford Mustang with 3.7 liter V6 engine
2011 Ford Mustang with 3.7 liter V6 engine

K&N also manufactures many air intake systems for Ford Mustang models besides these. Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

2008 and 2009 Dodge Caliber SRT-4 Models Get Simple Horsepower with K&N Air Intake

Jun 1, 2012

Dyno Chart for 57-1560 air intake system

K&N air intake installed in 2008 Dodge Caliber SRT4

Some vehicles have the privilege of being selected for special upgrade packages in order to grab the attention of a specific audience. The Dodge Caliber SRT-4 is subject to such marketing. Most compact cars normally suffer from the"lack of power syndrome" but, that is not the case here. The SRT-4 Caliber includes a more powerful engine, better suspension, and brakes making it the "little hatch back that could."

K&N Air Intake System for 2008 and 2009 Dodge Caliber SRT-4 2.4L

K&N Performance Air Intake System for 2008 and 2009 Dodge Caliber SRT-4 2.4L

2008 Dodge Caliber SRT4 with K&N Performance Air Intake

In comparison to other manufactures that produce similar vehicles, the SRT-4 has trouble breathing efficiently with the restrictive factory intake system. For most, 255 horsepower under the hood of a vehicle that weighs around 2300lbs is plenty of juice but, there are improvements that can be made. A K&N performance air intake system is one of them.

Air intake system part number 57-1560 was designed, road tested, and dyno tested to ensure that higher performance is achieved. This air intake system made an estimated 10.85 horsepower over the factory intake system. Some would agree this is a generous power increase for the cost.

57-1560 includes a K&N high flow air filter, low restriction intake pipe, heat shield, and a hardware kit with installation instruction sheet. Simple hand tools are required for installation, which can be done in about 90 minutes.

Power and easy installation are not the only benefits offered by intake system 57-1560. K&N air intake systems provide outstanding air filtration and they give your engine compartment a nice custom look. All included parts are covered by the famous K&N Million Mile Limited Warranty. There is no need to purchase another air filter ever again. The K&N air filter is washable and reusable but this filter can be used for up to 100,000 miles before cleaning depending on driving conditions. With simple to follow cleaning instructions available in the K&N Recharger Kits, cleaning is made easy.

If you are interested in adding extra performance to your vehicle, air intake57-1560 fits the following models:

2009 Dodge Caliber SRT-4 with 2.4 liter engine
2008 Dodge Caliber SRT-4 with 2.4 liter engine

K&N also manufactures air intake systems for Dodge Caliber models besides these. Use theK&N application search to find parts for any vehicle then use the K&N dealer search to find a K&N dealer in your part of the world.