Latest News

Chris Ferguson is no stranger to lining up against other super late model drivers. In fact, he has five years of racing in this particular class under his belt. However, this season is a little different. He’ll see new faces and travel to unfamiliar venues. Ferguson will be experiencing his first season in the National Dirt Racing League.

Chris Ferguson relies on K&N products to navigate the dirt ovals of the NDRL series

One would suspect that the anticipation was practically overwhelming to the driver when he rolled into Phenix City, Alabama, to race in the Bama Bash, his first race of the season. But his actions lent to a totally different perspective. A little apprehensive at first, it didn’t take long for the driver to find his groove. With 20 laps to go , he muscled his way into the top five.

Things were looking promising when the driver moved into the top three. But bad luck eventually reared its ugly head. He lost his stronghold on those behind him, upon having a flat. However, it quickly became evident that quit was not in Ferguson’s vocabulary. Getting the Warrior 1G back in working order, he pressed onward, finishing 11th in a field of 25.

When asked about his confidence level prior to the race, Ferguson said, “I knew we had a great car, but I hadn’t raced since last November. So I was a little timid at first. However, once I got back in the seat, I knew we had a great shot at running good; so my confidence was high.

“There was some pressure, with it being such a big race,” he continued. “All of the country’s best drivers were there with over 40 cars trying to make the 24 car starting field. It was tough to even make the main event. The most pressure was the fact that the best of the best were there, racing door-to-door with me. So I knew I had to drive the best I could.

With the first race of the 2014 season behind them, Ferguson and his crew headed to the Smokey Mountain Speedway, at Maryville, Tennessee; where they would race in the Tennessee Tipoff. With what he considered a reputable run at the Bama Bash in his rearview mirror, the driver had no intentions of doing anything other than making a showing in race number two of the season as well.

A good performance during his initial race of the season was more than enough to boost his confidence. However, Ferguson was even more stoked to know that dirt super late model hall of fame member; Freddy Smith would be in their corner. “He no longer races,” explained, Ferguson. “But he comes to races with us, to consult and help us out on the road. Freddy is from the same part of North Carolina, and my family has always known him.”

Earning the tenth place spot in the $7,500.00 to win preliminary event, the driver returned the following day with aspirations of success. At the waving of the green flag, engines revved, the air permeated with the aroma of exhaust and the battle was underway. The driver wasted no time getting into the mix, and at the race’s end, crossed the finish line in eighth place.

With many races ahead of him, Chris Ferguson is looking forward to the future. Ranked 10th in the points standing early on, the driver is acutely aware that the potential for a stellar season is certainly within his reach.

Although his skills will play an important role in the overall outcome of the season, the driver is also mindful that maintenance will also prove an essential element of success. That in mind, he and his crew will depend upon K&N products to keep his engine running contaminant free.

“I use the K&N 6 inch washable and reusable air filters,” he explained, “along with their fuel and oil filters. I also use K&N cleaning supplies to clean our filters. K&N makes the best filters on the market."

“The fact that we can use about five air filters to run around 60 races a year is unbelievable,” he continued. “We put over 2,000 laps on our engines, and our K&N filters stand just as long. I’ve never had issues with any of our K&N products, and we’re proud to say that our team will always be a K&N customer.”

With a high confidence level and the backing of excellent products, Chris Ferguson is apt to experience a memorable 2014 season. When asked what his fans can expect throughout the remainder of the year, Ferguson concluded, “A lot of traveling and hopefully, more wins. We just knocked out a $10,000.00 win in Virginia and followed it up with a $5,000.00 win in Tennessee this past weekend. We plan to continue following the the National Dirt Racing League.”

K&N 62-1600WT-L Crankcase Vent Filter with rubber flange in red

K&N 62-1600WT-L Crankcase Vent Filter with rubber flange in white

A crankcase vent filter is perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. This is why K&N has introduced the 62-1600 series of crankcase vent filters. You can choose from 3 different colors to match your car's color scheme: 62-1600WT-L (white), 62-1600RD-L (red) or 62-1600BL-L (blue).

These crankcase air filters are labeled in several languages for the European and Canadian markets. They are constructed with a synthetic filter media and they come with a K&N embossed chrome top. They are designed to clamp directly on to metal or plastic tubing where venting is needed. The K&N 62-1600WT-L, 62-1600RD-L and 62-1600BL-L can be reused over and over again. All you have to do is wash them using K&N's Synthetic Air Filter Cleaner. See our synthetic air filter cleaning instructions or watch the K&N synthetic air filter cleaning video. These vent filters have pliable rubber flanges that absorb vibration and they will fit any application with a tube diameter between 3/8 inch to 1/2 inch. The base is metal and connects to a rubber flange. K&N has many shapes and sizes that fit almost any need. See K&N's crankcase vent filter page for more information and a list of crankcase vent filters by dimension.

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

The SCORE-International Baja 500 race is tough on man and machine. The Red Bull Trophy Truck of Menzies Motorsports suffered a flat tire after only 100 miles

The 46th running of the annual SCORE-International Baja 500 began and ended in Ensenada, Mexico. Every year racers and fans flock to the Baja peninsula for this legendary single loop race that goes approximately 500 miles through amazing coastal and desert terrain. To say that racing in Baja takes courage would be a serious understatement.

A chase vehicle helped the Red Bull Trophy Truck of Menzies Motorsports get back into the Baja 500 race and regain a lost position

There are well over 24 classes of vehicles which race the infamous Baja 500 each year. There are classes for two wheels, or four, cars, trucks and almost anything in between. Topping the list of the most spectated classes is the prestigious SCORE Trophy Trucks. Trophy Trucks are open production unlimited race vehicles with the appearance of a modern day pickup. But the similarities between a trophy truck and a production pickup pretty much end at the front grill. Make no mistake; a trophy truck is a highly sophisticated full blown race vehicle.

K&N sponsored Menzies Motorsports made the annual trek to Baja this year with high expectations. One look at the Red Bull sponsored trophy truck of Bryce Menzie and co-pilot Pete, reveals that this team means business. An excellent qualifying run slotted the Menzies Motorsports Red Bull trophy truck in the second overall starting position. Only one racer, last year’s champion Robby Gordon, stood between Menzies Motorsports and an overall victory.

A mechanical problem forced race leader Robby Gordon off the course and allowed the Menzies Motorsports Red Bull Trophy Truck to take the Baja 500 lead

With the waving of a green flag, the SCORE-International Baja 500 race began with Robby Gordon taking off first and Menzies Motorsports leaving exactly one minute after him. The first 100 miles of the race were uneventful with the top 5 trophy trucks retaining their starting positions. At about the 100 mile mark, Menzies Motosports got a flat tire and was passed by the #35 truck piloted by Jason Voss. The repair took less than a minute thanks to a Menzies chase vehicle helping Bryce and Pete get back in the race. As luck would have it, the #35 truck of Jason Voss had their own flat tire forty miles later. Bryce and Pete were now back in second place leaving only Robby Gordon in front of them.

Bryce Menzie and co-pilot Pete stand atop the Red Bull sponsored Trophy Truck and celebrate their third Baja 500 overall victory

Racing in Baja is extremely taxing on both driver and machine. Robby Gordon was struck with a mechanical issue at the 200 mile mark leaving Menzies with a clear view as they took over the lead. Bryce and his co-pilot Pete led the remainder of the race and were welcomed back into Ensenada, Mexico, by cheering fans. This win marks Menzies Motorsports’ third overall Baja 500 victory in the last four years.

“I just want to thank all of my sponsors who make this possible and to all of our crew and volunteers who sacrificed a lot to win this thing. I’m pumped!” said Menzies and he proceeded to spray the cheering crowd with champagne. He continued, “Our team would like to thank our sponsors, like K&N Filters for making this victory possible!”

Menzies Motorsports is proud to run K&N products on their race vehicles. Look up parts for your vehicle here.

Style, performance, and killer engine sound with Blackhawk Air Induction System 71-3066, from K&N

General Motors designed its line of HD full-size pickups, which includes the Chevy Silverado HD and GMC Sierra HD, to provide high towing and payload capacities beyond that of a regular duty pickup. While the 2500 and 3500 HD trucks have proved themselves as a solid work-horse, they’ve also become very popular with the custom truck crowd. Lifted and lowered Duramax diesel powered Silverados and Sierras can be seen storming the streets with a commanding presence. Here to help increase the horsepower, torque, and boldness of these already menacing trucks is the new Blackhawk Air Induction System, 71-3066, from K&N.

K&N Blackhawk Air Induction System for 2007 to 2010 Chevrolet Silverado and GMC Sierra 2500 / 3500 HD trucks

The 71-3066 Blackhawk Air Induction System is expert-engineered and guaranteed to increase horsepower and torque. It replaces the restrictive factory system with a free-flowing, mandrel bent aluminum air intake tube to help minimize restriction, straighten, and increase airflow to the engine. The mandrel bent aluminum intake tube is finished in a durable flat black powdercoat for a stealth look under the hood. K&N 71-3066 incorporates a heat shield which helps guard air entering the engine from ambient heat.

Dyno Chart for K&N 2007 to 2010 Chevrolet Silverado and GMC Sierra 2500 / 3500 HD trucks Air Intake 71-3066

For that true blacked out look K&N designed a new line of all black synthetic Dryflow air filters. Air induction system, part number 71-3066, includes K&N’s RU-5177HBK conical Dyflow air filter fitted to the inlet of the air induction system. K&N Dryflow filters provide excellent airflow rates as well as outstanding filtration efficiency. RU-5177HBK is washable and reusable and can go up to 100,000 miles between cleanings, depending on driving conditions. Use of Synthetic Air Filter cleaner, number 99-0624, is recommended when it comes time to clean RU-5177HBK. This Dryflow air filter does not need to be oiled.

Blackhawk Air Induction Systems are designed to perform as good as they look. The K&N 71-3066 air induction system puts down impressive performance gains in horsepower and torque. On the dyno, when installed on a 2007 Chevrolet Silverado 2500 HD 6.6 liter V8 diesel, the 71-3066 air induction system produced an estimated additional 12.53 horsepower at 2638 rpm and an incredible 27.67 pound-feet of torque at 2298 rpm.

K&N Blackhawk Air Induction Systems look and perform great on trucks like this custom 2008 Chevy 3500 HD

The 71-3066 Blackhawk Air Induction System is an easy to install performance upgrade that can be installed in about 90 minutes or less using basic hand tools, and by following K&N’s simple step-by-step instructions. It maintains all necessary factory connections and does not require any additional modifications be made to the vehicle.

K&N backs the 71-3066 air induction system with the famous K&N Million Mile Limited Warranty so owners can rest assured that their intake system will stand up to tough conditions. Whether the 2007 to 2010 Chevy or GMC Duramax diesel is used for work or play, the K&N 71-3066 air induction system will provide durable and reliable increased performance for years to come.

Blackhawk Air Induction System, 71-3066, is guaranteed to increase horsepower and torque on the Chevrolet and GMC models listed below:

2010 GMC SIERRA 3500 HD 6.6L V8 DSL
2010 GMC SIERRA 2500 HD 6.6L V8 DSL
2010 CHEVROLET SILVERADO 3500 HD 6.6L V8 DSL
2010 CHEVROLET SILVERADO 2500 HD 6.6L V8 DSL
2009 GMC SIERRA 3500 HD 6.6L V8 DSL
2009 GMC SIERRA 2500 HD 6.6L V8 DSL
2009 CHEVROLET SILVERADO 3500 HD 6.6L V8 DSL
2009 CHEVROLET SILVERADO 2500 HD 6.6L V8 DSL
2008 GMC SIERRA 3500 HD 6.6L V8 DSL
2008 GMC SIERRA 2500 HD 6.6L V8 DSL
2008 CHEVROLET SILVERADO 3500 HD 6.6L V8 DSL
2008 CHEVROLET SILVERADO 2500 HD 6.6L V8 DSL
2007 GMC SIERRA 3500 HD 6.6L V8 DSL
2007 GMC SIERRA 2500 HD 6.6L V8 DSL
2007 CHEVROLET SILVERADO 3500 HD 6.6L V8 DSL
2007 CHEVROLET SILVERADO 2500 HD 6.6L V8 DSL

For all K&N Chevrolet Silverado and GMC Sierra 2500 / 3500 HD trucks air intakes visit the Chevrolet Silverado 2500 Air Intakes, Chevrolet Silverado 3500 Air Intakes, GMC Sierra 2500 Air Intakes and GMC Sierra 3500 Air Intakes pages on KNFilters.com.

K&N Air Intake under the hood of 2013-2015 Nissan Sentra 1.8L

In recent years, competition in the compact car segment has been all about fuel efficiency and technology in the cabin. Nissan looked to be losing ground in this segment, but the fully-redesigned 2013, 2014 and 2015 Sentra have brought the Sentra back into strong contention. Some Nissan Sentra owners may want a little more horsepower and a little more aggressive sound from the engine, and K&N is happy to oblige with the 69-7003TTK Typhoon performance air intake system.

Performance Air Intake System 69-7003TTK from K&N Filters

K&N guarantees that the 69-7003TTK will increase horsepower. It’s crafted with a mandrel-bent aluminum intake tube that helps to minimize restriction in the airflow pathway. The tube is then powdercoated with a durable black finish for a sleek look under the hood. An oversized K&N RC-5128 air filter is fitted to the inlet of the tube, helping to increase airflow and providing excellent air filtration as well as engine protection. The filter is made using K&N’s famous oiled cotton gauze filter media so it is washable and reusable and never needs to be replaced. The RC-5128 can go up to 100,000 miles between cleanings, depending on driving conditions. A heat shield is incorporated into the 69-7003TTK performance air intake system to shroud the air filter from radiant heat under the hood. This particular air intake system utilizes the factory fresh air duct to help direct cooler air into the engine.

Dyno Chart Caption: 2013 Nissan Sentra gains an estimated 2.3 more horsepower

All of these impressive design elements come together to yield more horsepower and torque. On the dyno, the 69-7003TTK produced an estimated additional 2.3 horsepower at 5255rpm and 2.3 pound-feet of torque at 5255rpm to the wheels over the factory intake system.

The 69-7003TTK is easy to install and maintains all the necessary factory connections. K&N also backs this intake system with the industry-leading K&N Million Mile Limited Warranty so owners can rest easy knowing their purchase is protected. Some would say that you can’t have excellent fuel economy and more horsepower, that the two are mutually exclusive. However, with the addition of a K&N performance air intake system you can have the impressive fuel economy of the 2013, 2014 and 2015 Nissan Sentra 1.8 liter as well as more horsepower from the K&N 69-7003TTK Typhoon performance air intake system.

Performance air intake 69-7003TTK is designed to fit the following Nissan Sentra models:

2015 Nissan Sentra 1.8L
2014 Nissan Sentra 1.8L
2013 Nissan Sentra 1.8L

For all K&N Nissan Sentra 1.8L air intakes visit the Air Intakes for Nissan Sentra page on KNFilters.com.