Latest News

K&N Air Intake System 69-6033TTK is powdercoated in a textured black finish to protect the tube and match the engine bay of the 2013-2016 Mazda 3

The all new Mazda 3 sedan and five-door hatchback models are equipped with forward thinking technology from the factory. The new Skyactive engines, like the 2.0L Skyactive-G engine that comes standard in the 2014 Mazda 3, is designed with fuel efficiency, performance, and lower emissions in mind. Skyactive technology is also incorporated into the transmission, body, and chassis components to help increase efficiency without sacrificing performance.

Performance Air Intake System 69-6033TTK from K&N Filters is designed to increase horsepower and torque for 2013-2016 Mazda 3 2.0L models

The 2.0L Skyactive-G engine is rated at 155 horsepower and 155 lb-ft of torque from the factory, but reducing air intake restriction can help this advanced engine perform even better. Owners seeking some extra boost in the power department can now install the 69-6033TTK K&N performance air intake system.

The 69-6033TTK from K&N is precision-engineered to be a simple-to-install performance add-on. The backbone of this intake system is a free-flowing mandrel-bent aluminum intake tube which helps to minimize restriction, allowing your engine to breathe easier. A venturi is incorporated into the tube to straighten airflow resulting in improved drivability and power gains. A durable textured black powder coated finish is applied to the tube, providing a cohesive appearance under the hood that will look great for years to come.

2014 Mazda 3 2.0-liter Skyactive-G gains an estimated 5.5 more horsepower

K&N equips the 69-6033TTK with the oversized RU-4960XD air filter, providing a large surface to help increase airflow while providing outstanding engine protection. The filter is made with K&N’s famous high-flow filter media so it’s washable and reusable and can even go up to 100,000 miles between cleanings, depending on driving conditions. To top it all off, a heat shield shrouds the air filter under the hood, helping to deflect engine heat away from incoming air.

All of the design features of the 69-6033TTK performance air intake system work in harmony to deliver increased performance. On the dyno, 69-6033TTK produced an estimated additional 5.5 horsepower at 4982rpm and an equally helpful 5.65 pound-feet of torque at 4938rpm over the factory system.

The 69-6033TTK performance air intake system is an excellent upgrade for 2013-2016 Mazda 3 sedan or 5-door models with the 2.0L Skyactiv-G engine. With simple to follow instructions and no need to make any other modifications to the vehicle, you’ll be on the road in approximately 90 minutes with more horsepower under your right foot.

If all that weren’t enough, K&N backs the 69-6033TTK with the industry-leading K&N Million Mile Limited Warranty. If you’re looking to take your 2013, 2014, 2015 and 2016 Mazda 3 sedan or 5-door models with the 2.0L engine to the next level, look no further than the 69-6033TTK Typhoon air intake system.

K&N Air Intake System 69-6033TTK is designed to provide a lifetime of increased power on the following Mazda models:

2016 MAZDA 3 2.0L L4 F/I
2015 MAZDA 3 2.0L L4 F/I
2014 MAZDA 3 2.0L L4 F/I
2013 MAZDA 3 2.0L L4 F/I - Eng. Skyactiv

For all K&N Mazda 3 air intakes visit the Mazda 3 Air Intakes page on KNFilters.com.

Sitting in third place worked to Jesse Little’s advantage as he was able to avoid a wreck and bring home a win in the Granite State 100 at New Hampshire Motor Speedway

Jesse Little was ecstatic to have his first NASCAR K&N Pro Series East win and was able to hand his mother the trophy as a birthday present

With one lap to go Jessie Little, who hails from Sherrills Ford, North Carolina, drove around a crash involving the race leaders and on to his first career victory in the Granite State 100 NASCAR K&N Pro Series East race. Little was ecstatic to have his first win and of all days he did it on his mom’s birthday. Little said “It’s an amazing birthday present that I can hand her that trophy.”

Up until that final lap Nick Drake was leading the race in his number 15 Napa Auto Parts Toyota. A bold attempt by Brandon Jones to take the lead resulted in both racers crashing. Nick Drake was quoted as saying “We thought we had the win, but we were taken out coming for the checkered flag.” Drake went on to say “The 33 just drove right into us, there’s nothing else we could have done.” Nick Drake would finish 24th in the Granite State 100, and Brandon Jones in the number 33 Wolfpack Energy Services Chevrolet would cross the line 21st.

It looked as if Nick Drake would get the win in his number 15 NAPA Auto Parts Toyota but was taken out by Brandon Jones’ failed attempt to take the lead

Eddie MacDonald used his second place finish in the Grimm Construction / Exit Realty Chevrolet SS as practice for his NASCAR Sprint Cup Series debut that same weekend

Ben Rhodes headed into the Granite State 100 at New Hampshire Motor Speedway with hopes of matching the NASCAR K&N Pro Series East record of five straight wins. Rhodes’ chances looked pretty good as he had the fastest qualifying time and started from the pole position. He spent most of the race battling for position among the top five, but an infraction on a restart late in the race resulted in a penalty and an uncharacteristic finish near the back of the pack. After the race Rhodes said “The race at New Hampshire was disappointing, but that will be our mulligan for 2014. We’ll move on and be ready to contend for the victory again next weekend.”

Eddie MacDonald drove the number 71 car to a second place finish just .313 seconds behind winner Jessie Little. Cale Conley followed in third place with Jay Beasly and Chad Finley rounding out the top five finishers.

Ben Rhodes spent most of the race battling with the top five drivers but a penalty caused an uncharacteristic 22nd place finish in the Granite State 100

17-year-old North Carolina native Jessie Little got on top of his car to celebrate his first time on victory lane in the Granite State 100 at New Hampshire Motor Speedway

Ben Rhodes is still leading the series points championship with Gray Gualding 62 points behind in second place and Cameron Hayley right on Gualding’s heels with only three points separating the two racers. Jessie Little and Brandon Jones are 4th and 5th respectively in the points chase.

The Jegs 150 at Columbus Ohio Motor Speedway is the next NASCAR K&N Pro Series East race.

The 2014 Polaris RZR XP 4 1000 boasts 107 horsepower and seating for four sand dune fanatics

The Polaris Ranger RZR was introduced in 2008 and became the first factory sport side by side ATV. Even though other manufacturers offered side by sides, like the Yamaha Rhino, they were primarily intended as utility all-terrain vehicles. Prior to the Polaris Ranger RZR it was the aftermarket and enthusiast communities that made side by side ATV’s fun. The introduction of the RZR in 2008 spawned an all new market segment and the evolution of the sport side by side ATV has progressed in rapid bursts.

PL-1014 for the 2014-2016 Polaris Ranger RZR XP 1000 is designed to increase airflow without sacrificing engine protection or filtration efficiency

For 2014, 2015 and 2016 Polaris has introduced the new sport side by side RZR XP 1000 and the larger four-seat RZR XP 4 1000. The new RZR 1000 models use an innovative Prostar 1000 999cc DOHC 4-valve per cylinder EFI twin engine. Polaris boasts a class leading 107 horsepower and 5.33 seconds 0-50 mph acceleration time. Despite the level of technology used in the 2014 RZR XP 1000 and RZR XP 4 1000 the factory chose to supply these models with a low-technology disposable paper air filter.

2014-2016 Polaris RZR 1000 owners can now equip their side by sides with the high-flow air filter technology incorporated into K&N replacement air filter, part number PL-1014. The new K&N RZR 1000 replacement air filter, PL-1014, is designed to fit into the stock air box without any need for modifications. K&N replacement air filters are made with specially woven cotton gauze. Because cotton, by nature, is more breathable than paper, K&N replacement air filters can flow more air than a typical paper air filter. More air can result in increased performance and improved throttle response

Flow Chart for K&N 2014-2016 Polaris RZR4 and RZR XP 1000 Air Filter PL-1014

It would be false to assume that an increase in airflow with a K&N air filter comes at the expense of filtration efficiency and engine protection. K&N engineers placed filtration efficiency and dirt retention at the top of the priority list when developing PL-1014 for the 2014-2016 Polaris Ranger RZR XP 1000. This filter uses design elements that go above and beyond our standard on-road replacement air filters. K&N knows that a Polaris RZR will be subjected to some of the most extreme conditions on the planet. This is why K&N used two extra layers, totaling six, of our special tight weave cotton gauze sandwiched between wire mesh to form extra deep 1-1/4” pleats. Six layers of 1-1/4” deep pleated cotton filter media allows PL-1014 to outflow the stock air filter, hold more dirt for long service intervals, and offer 98.78% filtration efficiency.

A 2014 Polaris RZR XP 1000 has 16” of travel out front, 18” in the rear, and 13.5 inches of ground clearance to tackle almost any terrain

K&N performs filtration efficiency testing following the ISO 5011 protocol with ISO coarse test dust to guarantee that our air filters will provide high airflow without sacrificing engine protection. Calling this test dust coarse is almost preposterous, as 22% of the dust is rated at 10 microns or less. To provide perspective, a human blood cell is typically between 6 and 8 microns across. Click here to view detailed test results.

Perhaps more exciting than the increased performance that comes with a K&N replacement high-flow air filter is that they are also washable and reusable. The ability to wash and reuse a K&N air filter means that it will pay for itself over time. Part number PL-1014 can be washed and made like new using one of the K&N Recharger air filter service kits. Recharger, 99-5000, includes 12 fluid ounces of air filter cleaner and a 6.5 ounce aerosol bottle of air filter oil for quick and easy application. Recharger, 99-5050, differs in that it includes an 8 ounce squeeze bottle of K&N filter oil for a more precise application.

Part number PL-1014 for 2014, 2015 and 2016 Polaris RZR XP 1000 and RZR XP 4 1000 models is backed by a one year limited warranty. Replacement air filter PL-1014 is designed to provide increased performance, reusability, and longer air filter service intervals without any need for modifications or tuning for the following side by sides:

2016 POLARIS RZR XP TURBO 925
2016 POLARIS RZR XP 1000 EPS 999
2015 POLARIS RZR XP 4 1000 EPS 999
2015 POLARIS RZR XP 1000 EPS HIGH LIFTER EDITION 999
2015 POLARIS RZR XP 1000 EPS DESERT EDITION 999
2015 POLARIS RZR XP 1000 EPS 999
2014 POLARIS RZR XP 4 1000 EPS 999
2014 POLARIS RZR XP 1000 EPS 999

For all K&N Polaris RZR4 1000 and Polaris RZR XP 1000 air filters visit the Polaris RZR4 1000 Air Filters and Polaris RZR XP 1000 Air Filters pages on KNFilters.com.

Kyle Wyman, aboard the Millennium Technologies XR1200, battled with race leaders early on in the AMA Pro Vance & Hines Harley-Davidson Series race at Laguna Seca

The AMA Pro Vance & Hines Harley-Davidson Series is a spec-bike race series featuring modified Harley-Davidson XR1200 motorcycles. This series gives dedicated Harley-Davidson fans, owners, and dealers a chance to root for their favorite riders aboard a genuine Harley-Davidson motorcycle at AMA Pro Road Racing events across the nation.

K&N supported racer Kyle Wyman settled into third place at Laguna Seca aboard his Millennium Technologies Harley-Davidson XR1200 motorcycle

K&N supported Vance & Hines Harley-Davidson Series racer Kyle Wyman underwent surgery to repair a torn meniscus and remove cartilage from his knee just four days before the AMA Pro Road Racing event at Mazda Raceway Laguna Seca. Wyman was fresh off a recent crash at Barber Motorsports Park aboard the Millennium Technologies XR1200 in June. Regarding his knee, Wyman said “It felt all right,” he continued “It just feels good to be back on the podium. It’s been a really up-and-down season.”

Wyman lost some ground on the Vance & Hines Harley-Davidson race leaders Steve Rapp and Danny Eslick but crossed the finish line at Laguna Seca a good distance in front of the pack

Wyman started the AMA Pro Vance & Hines Harley-Davidson Series race at Laguna Seca from third place on the grid. He would battle with race leaders Danny Eslick and Steve Rapp early on before settling into a rhythm and finishing with a third place podium position. Wyman said of his performance “About lap four I over-revved my bike coming up the corkscrew. I lost some power there and couldn’t stick with the leaders.”

Just four days after knee surgery K&N sponsored XR1200 racer Kyle Wyman stands on the AMA Pro Vance & Hines Harley-Davidson Series podium in third behind Steve Rapp and Danny Eslick

The defending AMA Pro Vance & Hines Harley-Davidson Series champion, Steve Rapp took off at the start of the race and broke free of the rest of the pack. Rapp would cross the finish line first, however, he was assessed a ten-second penalty as a result of having jumped the start. Rapp’s lead was so great that he still finished second in the race with Danny Eslick named the winner of the AMA Pro Vance & Hines Harley-Davidson series round held at Mazda Raceway Laguna Seca.

The AMA Pro Vance & Hines Harley-Davidson Series race at Laguna Seca marks the halfway point of the 2014 season. Kyle Wyman’s podium finish moved him up into 6th place in the overall series points championship.

Since 1985 the Honda 250 Rebel has taught new riders the basic skills they’ll need to move on to larger and faster motorcycles. Whether they owned a Rebel 250, or rode one during a Honda Rider Education Center course, many people have fond memories of the venerable Honda CMX250C Rebel. The CMX250 Rebel, and its sibling the CB250 Nighthawk, use bullet-proof air cooled 234 cc parallel-twin cylinder engines that can trace its roots back to the Honda CM200T Twinstar from the early 1980’s.

K&N air filter, HA-2596, is designed to fit into the stock air box of 2009-2016 Honda CMX250C Rebel motorcycles and retain the factory vent connection

K&N has finally released a new washable and reusable air filter, number HA-2596, to meet the demand for increased performance and ease of maintenance by Honda Rebel owners. This particular High-Flow Replacement Air Filter will need to be oiled with the supplied pillow pack of oil before it is ready to ride. K&N’s HA-2596 replacement air filter is specifically designed to fit into the stock air filter assembly of 2009 to 2016 Honda CMX250C Rebel cruiser motorcycles with a 234 cc parallel-twin engine.

Flow Chart for K&N 2009-2016 Honda CMX250C Rebel Air Filter HA-2596

K&N High-Flow Replacement Air Filters are performance designed to provide increased airflow, resulting in increased acceleration and throttle response while providing excellent filtration. Fuel management changes or additional modifications to the Honda CMX250C Rebel are not necessary to obtain increased performance.

Some might be worried that an increase in airflow comes at the expense of filtration efficiency and engine protection. K&N performs filtration efficiency testing following the ISO 5011 protocol to guarantee that our air filters will provide high airflow without sacrificing engine protection. Click here to view the detailed test results.

Perhaps more exciting than the increased performance that comes with a K&N High-Flow Air Filter is that they are also washable and reusable. The ability to wash and reuse a K&N air filter means that it will pay for itself over time. Part number HA-2596 can be washed and made like new using one of the K&N Recharger air filter service kits.

Covered by the famous K&N Million Mile Limited Warranty®, and made in the USA, K&N’s HA-2596 will be the last air filter your 2009-2016 Honda CMX250C Rebel motorcycle will ever need. HA-2596 is designed to be installed without any need for modifications or tuning in the following Honda motorcycles:

2016 HONDA CMX250C REBEL 234 – All
2015 HONDA CMX250C REBEL 234 – All
2014 HONDA CMX250C REBEL 234 – All
2013 HONDA CMX250C REBEL 234 – All
2012 HONDA CMX250C REBEL 234 – All
2009 HONDA CMX250C REBEL 234 – All

For all K&N Honda CMX250C Rebel air filters visit the Honda CMX250C Rebel Air Filters page on KNFilters.com.