The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
A truck powered by a diesel engine can do more useful work per unit of energy
consumed than vehicles run by gasoline. It is one of the most efficient internal
combustion engines made, supplying power for a wide range of applications.
Wherever there are trucks, you can see diesel technology at work on any given
day.
K&N Engineering has released one of the most creative air filter designs on the
market for the 2003, 2004, 2005, 2006, 2007, 2008 and 2009 Dodge Ram 2500 or 3500 pickup 5.9L L6 Diesel.
Each K&N
E-0776 air filter is heavy duty, specially designed with 6 layers of
cotton in a "basket" like shape for a much larger surface area than the OEM
(original equipment manufacturer) replacement filter which is a flat panel type
filter.
K&N E-0776
Replacement Air Filter for the 2003-2009 DODGE RAM 2500 PICKUP 5.9L L6 Diesel
Engine.
Along with compression and fuel, air is a basic requirement for diesel
engine operation, and large amounts of it! Volumetric efficiency varies with
speed and load and the volume of air pumped into diesel engines increases the
importance of air filtration, meaning removing dirt and other abrasives from
incoming air.
For maximum efficiency, diesel air filter restriction should be less than 25
inches of water vacuum, compared to a gas motor which uses only 10 inches of
water restriction. Since diesels work harder at pulling air into the engine this
creates a greater opportunity for dirt and silicates to enter the engine. Dirt
or silicates in the engine can cause severe damage, including cylinder wall
wear.
The K&N E-0776 air filter's design increases air filtration efficiency and
service life maximizing the removal of dirt and other abrasives from incoming
air while providing a high flow of air to your engine. This unique design makes
maximum usage of area in the factory airbox and gets as much air inside the
engine as possible, working efficiently in dusty conditions or off road
recreational areas, along with daily commuting. The simple drop-in design
increases horsepower and acceleration while providing excellent filtration.
One of the most wanted vehicles by consumers in 2005 is listed as the
redesigned Ford Mustang GT with retro styling. There are color options, interior
options and power options for every buyer.
When it comes to buying a new car, the selling term "options" means a whole lot
more than satellite radio and a DVD video with surround sound. K&N Engineering
has designed a custom aerodynamically engineered tube that gives the 2007, 2008 and 2009 Mustang GT even more power options.
Each K&N 63-2565 Intake Kit uses a hand designed high density polyethylene (a durable type of plastic)
intake tube that is rotationally molded and virtually eliminates air path
restriction by replacing the air filter and the entire air path to the engine.
This helps the Mustangs natural horsepower. Once installed K&N tests show the
estimated horsepower gain: 15.26 HP @ 6000 RPM.
K&N 63-2565 AirCharger Air Intake for the 4.6L Ford Mustang GT
The 2005 and 2006 Ford Mustang GT shows a gain of 15.26 horsepower at 6000 rpm with K&N's performance air intake 57-2565.
K&N Engineering has adapted the hydrocarbon trap designed by Ford
into this new intake for applications that utilize it. As the vehicle stops, the hydrocarbon gases that have not
burned, along with the fuel that is still inside the intake manifold work back
through the engine. By incorporating this honeycomb looking hydrocarbon trap
into the intake, these gases are restricted from escaping into the environment
as in the factory intake system. Also once this kit is installed, K&N guarantees
more horsepower.
It takes 90 minutes or less to install, and can last up to 100,000 miles before
service is required, depending on driving conditions. There is also a million
mile limited warranty on the K&N 63 Series Intake Kits also known as AirCharger
Air Intakes.
The K&N intake kit, installed on the Ford Mustang GT is an aggressive powerful
addition to an icon.
If you own a 2003 or 2004 Toyota 4 Runner with a 4.7L engine you are in luck!
K&N recently released a new
77-Series intake system, part number
77-9022KP, for
the 2003-2004 Toyota 4 Runner which is guaranteed to provide more horsepower. In
fact K&N tests have shown a
horsepower gain of 12.77 HP @ 5007 RPM for this
intake. You can especially feel this added power and torque when accelerating
and when towing a load. This intake, like all other K&N intakes, was engineered
specifically to work within the vehicle's computer specifications while
maximizing power and allowing air to flow with little restriction. One
noticeable design characteristic of this air intake is the reduction in diameter
just before the mass air sensor. It would be far easier to use the same diameter
throughout but that won't provide the best engineered solution!
K&N 77-9022KP High Performance Air Intake for the 2003 or 2004 4.7L 4-Runner
It takes about 90 minutes or less to
install this kit
and the lifetime K&N air filter performs for up to 100,000 miles before service
is required. You would go through a lot of clogged paper filters before this K&N
filter will need servicing. There is also a million mile limited warranty on all
K&N 77-series high performance air intake systems. K&N manufactures hundreds of
air intake kits.
Owners of a 2006 Hummer H3 with the 3.5L engine now have the opportunity to add
16HP with the addition of a K&N 77-Series Intake System. In testing at K&N this
intake, part number 77-3044KP, provided a 16.46 HP gain at the real wheels when compared to the factory intake system. The intake is easy to install, requiring a few basic tools: socket set, two wrenches, a screw driver, and an Allen wrench.
K&N 77-3044KP Air Intake for the 2006 3.5L Hummer H3
This 77-Series air intake was engineered specifically for the Hummer H3 and its computer's electronic specifications. The intake has a slightly smaller diameter on the filter end with engineered components strategically placed to ensure air flow characteristics fall within the vehicle's computer parameters while maximizing power at the rear wheels. The design incorporates a heat shield that takes advantage of the existing stock factory inlet to bring in cold air outside the engine compartment. The intake's polished finish, cost, and ease of installation make it one of the best horsepower additions available for the H3.
The 77-3044KP can be obtained through most national auto parts store chains as well as through many performance shops, auto repair facilities, and online stores. Go to
www.KNFilters.com to find a K&N dealer near you.
RIVERSIDE, CA - GM trucks and SUVs have become a staple of American life. They're safe, comfortable, utilitarian and more cosmetically appealing than the average minivan. Though impressive in the power department, a little more horsepower is always helpful with these haulers. With the addition of K&N Engineering's new 77-Series intake kit (PN 77-3050KP), 2005, 2006 and 2007 Chevrolet (Chevy) Silverado, Tahoe, Suburban, Denali, Yukon and Cadillac Escalade owners can appreciate an 8+ horsepower gain at the wheels accompanied by a newfound growl under the hood.
All 77-Series Intake Systems utilize high-strength, mandrel-bent, aluminum intake tubing, engineered to create a smoother, less resistant path for air to travel into the engine. The powder-coated heat shield included with K&N's 77-Series Intake Systems helps to maintain a cooler intake charge. The result is increased power and torque where you need it. Better engine efficiency typically results in improved fuel mileage as well. Designed to work in conjunction with the metal tubing, K&N's 77-Series Intake Systems incorporate a K&N High-Flow washable/reusable air filter that can last up to 100,000 miles between cleanings and full stainless-steel installation hardware.
Designed to be installed with simple hand tools in under 90-minutes, the K&N Filter can be cleaned with K&N's (99-5050) cleaning kit for a lifetime of high-performance filtration and protection. Available in a multiple high-quality finishes, the 77-Series GM truck and SUV intake system is street legal in most states and includes the famous K&N Million Mile Limited Warranty .
The 77-3050KP will also fit the following vehicles:
2007 GMC SIERRA DENALI CLASSIC 6.0L
2007 GMC SIERRA 1500 CLASSIC 5.3L
2007 GMC SIERRA 1500 CLASSIC 5.3L
2007 GMC SIERRA 1500 CLASSIC 4.8L
2007 CHEVROLET SILVERADO 1500 CLASSIC 5.3L
2007 CHEVROLET SILVERADO 1500 CLASSIC 5.3L
2007 CHEVROLET SILVERADO 1500 CLASSIC 4.8L
2006 GMC YUKON XL 1500 5.3L
2006 GMC YUKON DENALI XL 6.0L
2006 GMC YUKON DENALI 6.0L
2006 GMC YUKON 5.3L
2006 GMC YUKON 5.3L
2006 GMC YUKON 4.8L
2006 GMC SIERRA 1500 5.3L
2006 GMC SIERRA 1500 5.3L
2006 GMC SIERRA 1500 4.8L
2006 CHEVROLET TAHOE 5.3L
2006 CHEVROLET TAHOE 5.3L
2006 CHEVROLET TAHOE 4.8L
2006 CHEVROLET SUBURBAN 1500 5.3L
2006 CHEVROLET SILVERADO 1500 6.0L
2006 CHEVROLET SILVERADO 1500 5.3L
2006 CHEVROLET SILVERADO 1500 5.3L
2006 CHEVROLET SILVERADO 1500 4.8L
2006 CHEVROLET AVALANCHE 1500 5.3L
2006 CADILLAC ESCALADE 6.0L
2005 GMC YUKON XL 1500 5.3L
2005 GMC YUKON DENALI XL 6.0L
2005 GMC YUKON DENALI 6.0L
2005 GMC YUKON 5.3L
2005 GMC YUKON 5.3L
2005 GMC YUKON 4.8L
2005 GMC SIERRA DENALI 6.0L
2005 GMC SIERRA 1500 5.3L
2005 GMC SIERRA 1500 4.8L
2005 CHEVROLET TAHOE 5.3L
2005 CHEVROLET TAHOE 4.8L
2005 CHEVROLET SUBURBAN 1500 5.3L
2005 CHEVROLET SILVERADO SS 6.0L
2005 CHEVROLET SILVERADO 1500 5.3L
2005 CHEVROLET SILVERADO 1500 4.8L
2005 CHEVROLET AVALANCHE 1500 5.3L
2005 CADILLAC ESCALADE 6.0L
2005 CADILLAC ESCALADE 5.3L
For more information about K&N Filters, please contact K&N Engineering, Inc., P.O. Box 1329,Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected], or visit www.knfilters.com.
