Ford Adds Drift Stick to Focus RS at SEMA 2017; K&N Adds Power And Reliability
- 2 nov 2017
The Drift Stick is an aluminum lever between the driver’s seat and manual transmission to induce drift with the simple pull of a lever. The system operates by utilizing the all-wheel-drive system combined with the ABS. A pull of the lever triggers the rear drive unit clutches to open and applies hydraulic pressure to lock the rear wheels. The result is the ability to execute a clutch-free drift turn similar to that of a rally or drift car.
Unlike many original equipment and replacement air filters, K&N replacement air filters are manufactured from multiple layers of oiled extra-fine weave grade cotton filter media. Developed originally to maintain power while protecting the engine in desert racing after much experimentation K&N selected oiled cotton as the best filter media as it offers less resistance than traditional filters.
The K&N 69-3539TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction and adds an estimated 33.01 horsepower. The 69-3539TB air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs using the factory mounting locations with a molded scoop that funnels outside air towards the filter. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has a blue powdercoat finish to match the car’s badging and it accommodates the factory air pressure sensor.
Originally developed for demanding race applications like 10,000 horsepower Top Fuel Dragsters, the K&N Premium Wrench-Off Oil Filter has become a favorite among consumers as well for its durability and easy removal, as they come with a one-inch nut welded to the top of the canister. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. The filters are manufactured with thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris, while a drilled hole on the nut provides for safety wire attachment so the filter doesn’t loosen during competition. The K&N Premium Wrench-Off oil filters also use a resin impregnated cellulose filter media which provides higher flow rates while maintaining outstanding filtration. Check out 2017 Focus RS part number HP-1002.
The mechanical filtration is accomplished with a dual woven T 304 stainless steel micro-screen that provides excellent engine protection while providing a substantial increase in oil flow when compared to standard disposable oil filters. The ability to disassemble, inspect the filter screens, then reassemble the filter is an invaluable tool for engine builders in determining the condition of the motor. So whether your Ford Focus RS is equipped with a Drift Stick or not, K&N has the filters that will help to extend the life and improve the performance of your hot hatch. |
